Penerapan RFID Dalam Pendataan Kehadiran Pegawai Negeri Sipil Berbasis Arduino
DOI:
https://doi.org/10.30865/mib.v5i3.3056Keywords:
RFID, Excel, Attendance, Arduino, EmployeeAbstract
In today's modern era, the development of technology and informatics is not something foreign to the public. As currently, RFID and Microsoft Excel technology can be used to overcome problems in everyday life such as student attendance or employees in private and government-owned agencies, security systems, parking systems, and can be used to monitor various reports on inventory that can be known in real time. time either by online or by synchronizing data, so the development of RFID technology cannot be doubted. However, the development of technology in Indonesia itself has not been fully evenly distributed where there are some areas that still do not apply this technology as a tool for daily activities, there are still a lot of regions that collect employee attendance still use the para or signature method, this of course can lead to fraud committed by unscrupulous employees for personal gain. The purpose of this study is to optimize and reduce attendance manipulation of sub-district office employees, because there are still a lot of government agencies, especially local government agencies that still perform attendance manually, such as the Witihama sub-district office. Witihama District is one of the sub-districts in eastern Indonesia, precisely in East Flores Regency, East Nusa Tenggara which still uses the employee initials method, so a technology such as RFID is needed to support the work of employees because this technology is very effective. The function of using RFID is to validate attendance and the function of Microsoft Excel itself is a media of information and attendance monitoring system directly and accurately by the disciplinary commission of the sub-district office.
References
Purwianto, Eka., dkk.“Pemanftaan RFID (Radio Frequency Identification) Sebagai Alternatif Absensi Siswa (Studi Kasus : SMK Ar-Rahma Sukabumi, Jawa Barat)â€. Jurnal Teknoinfo, Vol. 13 N0o 2, ISSN 2615-224X, 2019.
Panoto, Nurhadi, “Prototype Presensi Kelas Berbasis RFID Dan Mikro SDâ€. Program Studi Teknik Elektro: Universitas Muhammdiyah Surakarta. Jully 2017.
Ahmad, Adiyaksa W.â€Rancang Bangun Sistem Absensi Karyawan Menggunakan RFID Yang Terintegeritas Dengan Database Berbasis Web pada CV Fokus Abadiâ€. Fakultas Teknologi Dan Komunikasi : Universitas Dinamika, Agustus 2020.
Andriyani, Devy. dkk. “Aplikasi Microsoft Excel Dalam Penyelesaian Masalah Rata-rata Data Berkelompokâ€. Ejournal unisba: Junal Matematika, Vol. 18 No. 1, ISSN: 1412-5056 / 2598-8980, Mei 2019.
Harmastuti & Styowati, Dwi,“Pemanfaatan Microsoft Excel Untuk Pembelajaran Matematika Dan Grafikâ€. Jurnal Dharma Bakti. Vol. 1 No. 1, ISSN: 2614-2929, April 2018.
Nasir, Muhammad. Dkk. “Sistem Monitoring Absensi Perkuliahan Dengan menggunakan RFID Berbasis Rapberry piâ€. Proceeding Seminar Nasional politeknik Negeri Lhokseumawe. Vol 3 No 1, NISSN 2598-3954, Oktober 2019
Setyawan, Dedy.,S.kom,.M.M., “ Sistem Absensi Karyawan RSUD Kardinah Dengan Menggunakan RFIDâ€. Tematik : Jurnal Teknologi Informasi Dan Komunikasi. Vol 5 No 1, Juni 2018
Dewanto, Murti F., dkk.â€Pengembangan Sistem Informasi Absensi Berbasis Radio Frequency Identification (RFID) Terintegritas Dengan Sistem Informasi Akademikâ€. Jurnal Informatika:Jurnal Pengembangan IT(JPIT). Vol 2, No. 02, ISSN: 2477-5126, Jully 2017.
Kosasih M, Niki. dkk. “Sistem Absensi Dosen Menggunakan Radio Frequency Identification (RFID) Berbasis Webâ€. JREC : Journal Of Electrical And Electronics. Vol. 5 No 2., Maret 2018.
Hartawan, Pri, G. & Isa, Tofik. I, “Aplikasi Absensi Perkuliahan Dengan Menggunakan Mikrokontroler Arduino Berbasis RFIDâ€. Jurnal SANTIKA: Jurnal Ilmiah Sains Dan Teknologi, Vol 6 No 2, ISSN2088-5407, Desember 2016.
Oktarina, Dwi,.M.kom, & Halim, Jimmy.,S.Kom.,â€Sistem Informasi Penjualan Dengan Menerapkan Teknologi RFIDâ€. Riau Journal Of Computer Science, vol.3 No.2. 146-155|146, Jully 2017.
Suherdi, Devri, Nurmadiyah & Aji, Sabda. “Perancangan Dan Implementasi Absensi Cerdas Berbasis Arduino Megaâ€. J-SISKO TECH : Jurnal Teknologi Informasi dn Teknologi komputer TGD. Vol 2 No 2, ISSN : 2621-8976, Jully 2019
Sokop, Jendri S. dkk.,“Trainer Periferal Antarmuka Berbasis Mikrokontroler Arduino Unoâ€. E-Journal Teknik Elektro dan Komputer, vol.5 no.3, ISSN: 2301-8402, 2016.
Julaeha, Siti & Somawati. “Sosialisasi Pengoperasian Microsoft Excel Untuk Administrasi Data Matematis Pada Karang Tarunaâ€. Jurnal PKM: Pengabdian kepada Masyarakat, Vol. 02 No. 03, p-ISSN 2614-574X, September-Desember 2019.
Misriana & Kartika, “Alat Patroli Lingkungan Perkantoran Berbasis Radio Frequency Identification (RFId)â€, Proceeding Seminar Nasional Politeknik Negeri Lhokseumawe, Vol.2 No.1, ISSN: 2598-3954, September 2018.
Dewanto, Murti. F., Herlambang. A. B, & Harjantana, J. T. A., “Pengembangan Sistem Absensi Berbasis Radio Frequency Idenfication (RFID) Terintegrasi Dengan Sistem Informasi Akademikâ€. Jurnal Informasi: Jurnal Pengembangan IT (JPIT). Vol. 02, No. 02. ISSN: 2477-5126, Jully 2017.
Miubarok, Syahrul, dkk.â€Pemanfaatan Modul RTC Berbasis Arduino Mega Sebagai Penentu Variabel Nutrisi Pada Sistem Kontrol Hidroponikâ€, Jurnal Transistor Elektro dan Informatika (TRANSISTOR EI). Vol. 3, No.1, pp. 5~8, Mei 2018.
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).