Penerapan Metode SAW (Simple Additive Weighting) Dalam Pemilihan Saham Terbaik Pada Sektor Teknologi

Authors

DOI:

https://doi.org/10.30865/mib.v6i1.3425

Keywords:

Decision Support System, Simple Addictive Weighting, Stocks.

Abstract

Stocks are one of the many investments that are favored by all groups because they promise high returns. But in addition to promising high returns, stocks can also provide a high risk of loss, which makes ordinary people afraid to start investing in the stock market. To prevent losses in buying stocks is to choose stocks with good fundamentals. To support this, we need an analysis that can help make decisions in choosing the best stocks in the technology sector. The saw method analysis will be used in this study, where the saw method is able to select alternatives based on predetermined categories. This study will rank the best stocks based on company fundamentals, namely EPS, PER, PBV, ROE, DER and Dividend Yield. The results of this study are EDGE stocks as the best stocks in the technology sector with the highest value of 0.88. The purpose of this research is to help investors choose stocks before investing in technology companies.

References

M. Hayati, “Investasi Menurut Perspektif Ekonomi Islam,†Ikonomika, vol. 1, no. 1, pp. 66–78, 2016.

S. Dilla, L. K. Sari, and N. A. Achsani, “Estimating the effect of the covid-19 outbreak events on the indonesia sectoral stock return,†J. Apl. Bisnis dan Manaj., vol. 6, no. 3, p. 662, 2020.

W. Windasari and T. Zakiyah, “Literasi Investasi Bagi Generasi Milenial di Era Digital,†JCSE J. Community Serv. Empower., vol. 1, no. 1, pp. 13–16, 2020.

S. H. Sahir, R. Rosmawati, and K. Minan, “Simple additive weighting method to determining employee salary increase rate,†Int. J. Sci. Res. Sci. Technol, vol. 3, no. 8, pp. 42–48, 2017.

N. C. Resti, “Penerapan Metode Simple Additive Weighting (SAW) pada Sistem Pendukung Keputusan Pemilihan Lokasi untuk Cabang Baru Toko Pakan UD. Indo Multi Fish,†INTENSIF J. Ilm. Penelit. dan Penerapan Teknol. Sist. Inf., vol. 1, no. 2, pp. 102–107, 2017.

T. R. Adianto, Z. Arifin, and D. M. Khairina, “Sistem pendukung keputusan pemilihan rumah tinggal di perumahan menggunakan metode simple additive weighting (saw)(studi kasus: Kota samarinda),†Pros. 2nd SAKTI, 2017.

P. M. Hasugian, “Perancangan Sistem Pendukung Keputusan Dalam Menentukan Dosen Berprestasi Dengan Metode Simple Additive Weighting,†J. Inform. Pelita Nusant., vol. 4, no. 1, 2019.

A. P. Windarto, “Penilaian Prestasi Kerja Karyawan PTPN III Pematangsiantar Dengan Metode Simple Additive Weighting (SAW),†Jurasik (Jurnal Ris. Sist. Inf. dan Tek. Inform., vol. 2, no. 1, pp. 84–95, 2017.

A. S. Putra, D. R. Aryanti, and I. Hartati, “Metode SAW (Simple Additive Weighting) sebagai Sistem Pendukung Keputusan Guru Berprestasi (Studi Kasus: SMK Global Surya),†in Prosiding Seminar Nasional Darmajaya, 2018, vol. 1, no. 1, pp. 85–97.

Y. Yulia, “ANALISIS PENGARUH RASIO LIKUIDITAS TERHADAP RETURN SAHAM (Studi Pada Perusahaan Indeks LQ 45 Yang Terdaftar Di Bursa Efek Indonesia),†J. Khatulistiwa Inform., vol. 4, no. 2, 2016.

W. Y. Rusyida and V. Y. Pratama, “Prediksi Harga Saham Garuda Indonesia di Tengah Pandemi Covid-19 Menggunakan Metode ARIMA,†Sq. J. Math. Math. Educ., vol. 2, no. 1, pp. 73–81, 2020.

N. Oktavina and Y. Yanitasari, “Sistem Penunjang Keputusan Penilaian Kesehatan Organisasi Koperasi Menggunakan Metode Simple Additive Weighting (SAW),†Techno Xplore J. Ilmu Komput. dan Teknol. Inf., vol. 4, no. 2, pp. 115–126, 2019.

A. Susanto, L. Latifah, and A. Fitriyani, “Decision support systems design on sharia financing using Yager’s fuzzy decision model,†in 2017 5th International Conference on Cyber and IT Service Management (CITSM), 2017, pp. 1–4.

T. S. M. T. A. Jaenudin, “Penerapan Metode SAW (Simple Additive Weighting) dalam Sistem Pendukung Keputusan untuk Menentukan Penerima Beasiswa,†Pros. Saintiks FTIK Unikom, vol. 2, 2017.

A. Pranolo and S. M. Widyastuti, “Simple additive weighting method on intelligent agent for urban forest health monitoring,†in 2014 International Conference on Computer, Control, Informatics and Its Applications (Ic3Ina), 2014, pp. 132–135.

F. Ardhy and D. M. Efendi, “Pemberian Reward Terhadap Karyawan Terbaik Dengan Mneggunakan Metode Simple Additive Weighting (SAW),†J. SIMADA (Sistem Inf. dan Manaj. Basis Data), vol. 2, no. 2, pp. 176–181, 2019.

F. Yani, Y. Yuranda, P. Pajarini, and R. Rosmawati, “Penentuan Beasiswa Pada SMPN 6 Pangkalpinang Menggunakan Metode SAW dan Fuzzy Multi Attribute Decision Making,†J. RESTI (Rekayasa Sist. dan Teknol. Informasi), vol. 2, no. 1, pp. 437–443, 2018.

Downloads

Published

2022-01-25

Issue

Vol. 6 No. 1 (2022): Januari 2022

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).