Model Optimasi Biaya Produksi Pada Jaringan Rantai Pasok Karet Rakyat Menggunakan Pemrograman Linier

Authors

  • Fido Rizki Universitas Bina Darma, Palembang
  • M Izman Herdiansyah Universitas Bina Darma, Palembang
  • Darius Antoni Universitas Bina Darma, Palembang

DOI:

https://doi.org/10.30865/mib.v5i2.2805

Keywords:

Optimization, Supply Chain, Rubber, Linear Programming, Lingo

Abstract

The purpose of this research is to optimize the smallholder rubber supply chain with the sample data in Kabupaten Musirawas, The main problem in the people's rubber plantation in Musirawas Regency that has not been able to be resolved include the supply chain system that is not optimal and efficient. Based on the results of the author's observations and interviews at the Plantation Office of Kabupaten Musirawas, there are three supply chain channels in Kabupaten Musirawas, the first is through the channel of Planters - Village Collectors - Subdistrict Collectors - Bokar Processing Factories, the second is Planters - Subdistrict Collectors - Bokar Processing Plants and the third is Planters - UPPB - Bokar Processing Factory, this study uses a linear programming method in determining the most efficient and profitable supply chain in Kabupaten Musirawas, For optimization testing the author uses the LINGO 13.0 software, The results of tests that have been carried out using LINGO software show that the optimal and efficient supply chain is channel 3

Author Biographies

Fido Rizki, Universitas Bina Darma, Palembang

Program Studi Magister Teknik Informatika

M Izman Herdiansyah, Universitas Bina Darma, Palembang

Program Studi Magister Teknik Informatika

Darius Antoni, Universitas Bina Darma, Palembang

Program Studi Magister Teknik Informatika

References

R. Yansah, M. I. Herdiansyah, and N. A. O. Saputri, “SISTEM E-SUPPLY CHAIN MANAGEMENT PENJUALAN BERAS RAKYAT (STUDI KASUS : PD PERSADA SEMBADA KABUPATEN OKU TIMUR),†in SHaPSITI, 2016, no. September.

D. Antoni, A. Afriansyah, and M. Akbar, “E-Supply Chain Management Value Concept for The Palm Oil Industry,†J. Sist. Inf., vol. 15, no. 2, pp. 15–29, 2019.

S. Khaswarina, Y. Kusumawaty, and E. Eliza, “ANALISIS SALURAN PEMASARAN DAN MARJIN PEMASARAN BAHAN OLAHAN KARET RAKYAT (BOKAR) DI KABUPATEN KAMPAR,†Unri Conf. Ser. Agric. Food Secur., vol. 1, pp. 88–97, 2019, doi: 10.31258/unricsagr.1a12.

Yuswandi, M. Sasmi, and H. Susanto, “ANALISIS PERBEDAAN PENDAPATAN PETANI KARET DALAM MEMASARKAN BOKAR MELALUI KUB DAN NON KUB DI DESA JALUR PATAH KECAMATAN SENTAJO RAYA,†MAHATANI, vol. 1, no. 1, pp. 35–47, 2018.

I. S. Nugraha, A. Alamsyah, and D. S. Agustina, “PENINGKATAN BAGIAN HARGA YANG DITERIMA PETANI KARET MELALUI PEMASARAN TERORGANISIR,†War. Perkaretan, vol. 1, no. 1, pp. 35–46, 2019, doi: 10.22302/ppk.wp.v1i1.617.

A. F. Kumala, E. Tetty, and S. Tarumun, “ANALISIS PEMASARAN DAN TRANSMISI HARGA PADA PETANI BOKAR DI DESA LUBUK BATU TINGGAL KECAMATAN LUBUK BATU JAYA KABUPATEN INDRAGIRI HULU,†Jom Faperta, vol. 2, no. 2, pp. 10–14, 2015, doi: 10.3969/j.issn.1008-0813.2015.03.002.

Sugiyono, METODE PENELITIAN KUANTITATIF KUALITATIF DAN R&D. Bandung: Alfabeta, 2013.

M. Veronica, D. Antoni, and M. Akbar, “Adopsi Website Quality Evaluation Method (WebQem) dan Iso 9126 untuk Mengukur Service Quality pada Ujian Online,†J. Teknomatika, vol. 8, no. 1, pp. 23–32, 2018.

J. Harisantoso, M. Surur, and S. Suhartini, “Pengaruh Model Problem Based Learning (Pbl) Terhadap Kemampuan Pemecahan Masalah Matematis Siswa,†J. Ilm. Soulmath J. Edukasi Pendidik. Mat., vol. 8, no. 1, p. 73, 2020, doi: 10.25139/smj.v8i1.2537.

S. Aji, F. Kusmaningrum, and M. Herni, “Optimisasi Keuntungan Menggunakan L R inear e f iner P yro Ug n ramm it in g di PT Pertamina (RU) VI Balongan,†J. Online Inst. Teknol. Nas. Maret, vol. 1, no. 4, pp. 2338–5081, 2014.

F. MULYANI, “PENGEMBANGAN MODEL DISTRIBUSI LOGISTIK BENCANA MERAPI DENGAN MIXED INTEGER LINEAR PROGRAMMING,†UNIVERSITAS ATMA JAYA YOGYAKARTA, 2014.

M. I. Herdiansyah, Hasmawati, D. Syamsuar, and A. F. Ismail, “Mixed Integer Linear Programming Model for Optimizing Batik Palembang Supply Chain Network,†Adv. Sci. Lett., vol. 24, no. 11, pp. 8422–8426, 2018, doi: 10.1166/asl.2018.12579.

W. Wiyanto and N. Kusnadi, “FAKTOR-FAKTOR YANG MEMPENGARUHI KUALITAS KARET PERKEBUNAN RAKYAT (Kasus Perkebunan Rakyat di Kecamatan Tulang Bawang Tengah Kabupaten Tulang Bawang, Lampung),†J. Agribisnis Indones., vol. 1, no. 1, p. 39, 2013, doi: 10.29244/jai.2013.1.1.39-58.

N. L. P. R. Dewi, M. S. Utama, and N. N. Yuliarmi, “FAKTOR-FAKTOR YANG MEMPENGARUHI PRODUKTIVITAS USAHA TANI DAN KEBERHASILAN PROGRAM SIMANTRI DI KABUPATEN KLUNGKUNG,†vol. 2, pp. 701–728, 2017.

R. Listyorini, E. S. Murtiono, and R. S. Agustin, “PENGARUH KONSENTRASI ASAM SULFAT DAN LAMA PERENDAMAN TERHADAP KUAT LENTUR KAYU KELAPA IMPLEMENTASI PADA MATA KULIAH ILMU BAHAN BANGUNAN,†Indones. J. Civ. Eng. Educ., vol. 4, no. 1, pp. 79–89, 2018, doi: 10.20961/ijcee.v4i1.22562.

Downloads

Published

2021-04-25

Issue

Vol. 5 No. 2 (2021): April 2021

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).