Implementasi Metode Simple Additive Weighting Pada Aplikasi Penentukan Karyawan Terbaik
DOI:
https://doi.org/10.30865/mib.v4i4.2293Keywords:
Best Employee Determination, Simple Additive Weighting, PHP, UML, SAW, MYSQLAbstract
Election of the best employees is an important aspect of employee performance management in a company because it produces useful information for employee administrative decisions such as promotions, awards, and other decisions. Making the best employee selection not only selects and determines the right employees, but it is also important for managers to plan mature policies in motivating and developing potential employees. The problem with choosing the best employees in company agencies is the difficult decision making by managers in determining who the best employees are really worthy because of limited time and the number of employees and work that must be done by managers so that the best employee implementation is only chosen by the manager and assessment. The criteria are ignored which causes the assessment results to be subjective. One of the methods built to solve problems in the best employee decision making is done by using the Simple Additive Weighting (SAW) method, which is then ranked for the best alternative in the form of employee assessment scores. In this study, the implementation of SAW used 5 criteria to determine the best employees, namely skills, personality, initiative, attendance and loyalty. The calculation results from the implementation of the SAW method are used as a reference for designing the best employee determination application. The system design uses the Unified Modeling Language (UML) and builds applications with PHP programming and MySQL databases.References
T. Prihatin, “Perbandingan Metode TOPSIS Dan SAW Dalam Penentuan Guru Berprestasi,†J. Tek. Komput. AMIK BSI, vol. V, no. 1, pp. 29–34, 2019.
M. Badaruddin, “Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Menerapkan Kombinasi Metode Simple Additive Weighting (SAW) dengan Rank Order Centroid (ROC),†J. Media Inform. Budidarma, vol. 3, no. 4, pp. 366-370, 2019.
H. Subagyo, A. Ariani, H. Qoriani, and G. Widodo, “Decision Supporting System Employee Performance Appraisal Narotama University with Simple Additive Weighting Method (SAW),†Proc. Int. Conf. Green Technol., vol. 8, no. 1, pp. 273–277, 2017.
P. S. Sukanto, “Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Pt Harjamukti Jaya Mandiri Menggunakan Metode Simple Additive Weighting,†JATISI (Jurnal Tek. Inform. dan Sist. Informasi), vol. 5, no. 1, pp. 109–118, 2018.
R. S. Hutasoit, A. P. Windarto, D. Hartama, and S. Solikhun, “Sistem Pendukung Keputusan Pemilihan Guru Terbaik Pada Smk Maria Goretti Pematangsiantar Menggunakan Metode Simple Additive Weighting (Saw),†Jurasik (Jurnal Ris. Sist. Inf. dan Tek. Inform., vol. 1, no. 1, pp. 56-63, 2018.
C. Surya, “Sistem Pendukung Keputusan Rekomendasi Penerima Beasiswa Menggunakan Fuzzy Multi Attribut Decision Making (FMADM) dan Simple Additive Weighting (SAW),†J. Rekayasa Elektr., vol. 11, no. 4, pp. 149–156, 2015.
Sugiyono, Metode Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta, 2014.
A. G. Anto, H. Mustafidah, and A. Suyadi, “Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Menggunakan Metode SAW (Simple Additive Weighting) di Universitas Muhammadiyah Purwokerto,†Pros. Senat. 2015 Fak. Tek. Univ. Muhammadiyah Purwokerto, vol. 3, no. 4, pp. 193–200, 2015.
Z. Zhang and K. Virrantaus, “International Journal of Geographical A fuzzy multiple-attribute decision- making modelling for vulnerability analysis on the basis of population information for disaster management,†Int. J. Geogr. Inf. Sci., vol. Vol. 28, N, no. September, pp. 1922–1939, 2014.
A. Setiadi, Y. Yunita, and A. R. Ningsih, “Penerapan Metode Simple Additive Weighting(SAW) Untuk Pemilihan Siswa Terbaik,†J. Sisfokom (Sistem Inf. dan Komputer), vol. 7, no. 2, pp. 104–109, 2018.
S. Kusumadewi, H. Purnomo, Aplikasi Logika Fuzzy. Yogyakarta: Graha Ilmu, 2010.
W. Priatna, A. Nugroho, Nurjeli, “Sistem Pendukung Keputusan Untuk Penentuan Dosen Favorit Menggunakan Simple Additive Weighting (SAW),†J. Ris. Sist. Inf. Dan Tek. Inform., no. 4, pp. 181–190, 2019.
W. Priatna and Suryadi, “Perancangan Sistem Pendukung Keputusan Untuk Pemilihan Lokasi Dalam Perluasan Usaha Kafe menggunakan Analytical Hierarchy Process,†J. RESTI (Rekayasa Sist. dan Teknol. Informasi), vol. 3, no. 3, pp. 511–517, 2019.
D. Anggraini, S. A. Putri, and L. A. Utami, “Implementasi Algoritma Apriori Dalam Menentukan Penjualan Mobil Yang Paling Diminati Pada Honda Permata Serpong,†J. Media Inform. Budidarma, vol. 4, no. April, pp. 302–308, 2020.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
