Design and Build Smart Street Lights by Utilizing Sensor and Tranduser Technology Based on Arduino Uno
DOI:
https://doi.org/10.30865/mib.v6i4.4520Keywords:
Public Street Lighting (PJU), Arduino Uno, Motion Sensor, Light Sensor.Abstract
Street lights or also known as Public Street Lighting (PJU) are lights that are used for street lighting at night making it easier for road users to see more clearly the road to be traversed, so as to improve traffic safety and security for road users and prevent the occurrence of accidents. crime, and gives an aesthetic value to a place. Public street lighting is an electronic item that is vulnerable or can be said to have a short service life, so repair and maintenance activities are absolutely necessary. Repairs can include network repairs, replacement of dead lights, checking cables and checking the condition of Public Street Lighting (PJU). The working system of street lights in Sei Kamah 1, Pasiran Village, Sei Dadap District, Asahan Regency, currently still uses the switch button on every electricity pole that is turned on by PLN officers or the surrounding community at night, and street lights still use essential light bulbs. so that the power released is too large and is detrimental to the electricity supplyer, although there are some street lights whose system turns on automatically when it is night and turns off automatically during the day but the installation is only in certain places plus sometimes street lights like this become the target of theft by irresponsible people. This study aims to create an automatic system street light design system in which this automatic system uses a motion sensor and a light sensor so that it can save more electric current. The device used is an arduino uno controller and uses the arduino ide programming language. The results of this study are expected to be a recommendation in the design of Public Street Lighting (PJU).References
I. G. A. Putra, A. A. N. Amrita, and I. M. A. Suyadnya, “Rancang Bangun Alat Monitoring Kerusakan Lampu Penerangan Jalan Umum Berbasis Mikrokontroler dengan Notifikasi SMS,†J. Comput. Sci. Informatics Eng., vol. 2, no. 2, pp. 90–99, 2018, doi: 10.29303/jcosine.v2i2.141.
R. Ananda and W. Handoko, “Penggunaan Rangkaian Booster Converter Dan Ic-Tp4056 Untuk Lampu Jalan Murah,†JURTEKSI (Jurnal Teknol. dan Sist. Informasi), vol. 7, no. 1, pp. 9–14, 2020, doi: 10.33330/jurteksi.v7i1.886.
K. Noviandi, R. R. Yacoub, and Junaidi, “Perancangan Alat Penghitung Penggunaan Daya Listrik Pada Lampu Penerangan Jalan Umum Berbasis Sensor Arus Dan Mikrokontroler,†J. Tek. Elektro Univ. Tanjungpura, vol. 1, no. 1–11, pp. 1–11, 2020.
M. N. Agriawan, Sania, C. Rasmita, N. Wahyuni, and Maisarah, “Prototype Sistem Lampu Penerangan Jalan Otomatis Menggunakan Sensor Cahaya Berbasis Arduino Uno,†PHYDAGOGIC J. Fis. dan Pembelajarannya, vol. 4, no. 1, pp. 39–42, 2021, doi: 10.31605/phy.v4i1.1489.
R. W. Ayu Reski and N. Syam, “Prototype Lampu Penerangan Jalan Otomatis Berdasarkan Sensor Cahaya Berbasis Arduino Pada,†vol. 1, no. 2, pp. 90–101, 2020.
D. G. Somadani Ade Heri, “Prototipe Penerangan Jalan Umum (Pju) Pintar Berbasis Arduino Menggunakan Solar Panel, Sensor Hc-Sr04 Dan Sensor Ldr,†Pros. Semnastek, vol. 3, no. PROSIDING SEMNASTEK 2018, pp. 2–8, 2018, [Online]. Available: https://jurnal.umj.ac.id/index.php/semnastek/article/view/3443.
A. Adam, M. Muharnis, A. Ariadi, and J. Lianda, “Penerapan IoT Untuk Monitoring Lampu Penerangan Jalan Umum,†Elinvo (Electronics, Informatics, Vocat. Educ., vol. 5, no. 1, pp. 32–41, 2020, doi: 10.21831/elinvo.v5i1.31249.
M. W. D. W.E. Putra, I.L. Kusuma, â€œç”°ä¸ å…‰ *1 ãƒ»å±±æ ¹åµ©å² *2 ・éšå´Žç¥å *3 ・ä¸æ¢å’Œå…‰ *1,†vol. 1, no. 3, pp. 107–115, 2020.
F. Tarbiyah, D. A. N. Keguruan, U. I. Negeri, and R. I. Lampung, “SMART KEY BERBASIS ANDROID PADA MATERI,†2022.
L. E. GarcÃa Reyes, “Sensor Ultrasonic,†J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2013.
R. Susanto, Y. Kristanto, S. Ridwanto, and D. Hisnuaji, “PERANCANGAN DAN IMPLEMENTASI SENSOR PARKIR,†pp. 18–29.
P. Cahyo, S. Nugroho, and M. I. Haj, “Sound Level Meter Berbasis Arduino Dengan Sensor Bunyi Dan Sensor Ultrasonic Untuk Menentukan Hubungan Jarak Dengan Intensitas Bunyi,†vol. 3, no. November, pp. 117–124, 2019.
S. Utama, A. Mulyanto, M. Arif Fauzi, and N. Utami Putri, “Implementasi Sensor Light Dependent Resistor (LDR) Dan LM35 Pada Prototipe Atap Otomatis Berbasis Arduino,†CIRCUIT J. Ilm. Pendidik. Tek. Elektro, vol. 2, no. 2, pp. 83–89, 2018, doi: 10.22373/crc.v2i2.3706.
D. A. O. Turang, “Pengembangan Sisrem Relay Pengenadalian Dan Penghematan Pemakaian Lampu,†Semin. Nas. Inform., vol. 2015, no. November, pp. 75–85, 2015.
K. Ahadi et al., “PENERANGAN JALAN UMUM DENGAN MENGGUNAKAN TEKNOLOGI SIMULATION OF ELECTRIC ENERGY POTENCIAL SAVINGS FOR STREET,†vol. 17, no. 1, pp. 31–42, 2018.
R. Tullah, Sutarman, and A. H. Setyawan, “Sistem Penyiraman Tanaman Otomatis Berbasis Mikrokontroler Arduino Uno Pada Toko Tanaman Hias Yopi,†J. Sisfotek Glob., vol. 9, no. 1, pp. 100–105, 2019.
E. Lolang, “) yaitu hipotesis yang akan diuji. Biasanya, hipotesis ini merupakan pernyataan yang menunjukkan bahwa suatu parameter populasi memiliki nilai tertentu.,†no. 3, pp. 685–695, 2015.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
