Rancangan Arsitektur Sistem Informasi E-Customer Relationship Management Menggunakan Metode Enterprise Unified Process

Authors

  • Retno Wulandari Universitas Kristen Satya Wacana, Salatiga
  • Kristoko Dwi Hartomo Universitas Kristen Satya Wacana, Salatiga

DOI:

https://doi.org/10.30865/mib.v6i3.4324

Keywords:

Architecture, System Information, Customer Relationship Management, Enterprise Unified Process

Abstract

Customer Relationship Management (CRM) is a management that discusses the handling of the relationship between customers and the company. In the Power Kitchen where one of the company's equipment in the city of Surabaya has problems related to handling complaints from customers. So we need a CRM system to build relationships with customers. Therefore, the Power Kitchen company needs a CRM system to make it easier for companies to handle complaints from customers. This research uses the Enterprise Unified Process method which is a framework for the software process used. This research has resulted in the form of recommendations for system architecture models to achieve company goals and service relationships between companies and customers.

References

D. A. Prawira, Eprilyani Nur Azizah, “Perencanaan Arsitektur Enterprise Menggunakan Metode Togaf ADM Pada Puskesmas Mempawah,†Semin. Nas. Sist. Inf. dan Teknol. Inf. 2018, pp. 153–157, 2018, [Online]. Available: Puskesmas, Enterprise Architecture Planning, TOGAF ADM, Blue Print, Terintegrasi%0A1.

S. Sandfreni and F. Adikara, “Menyelaraskan Perencanaan Strategi Teknologi Informasi yang Didasarkan pada Strategi Manajamen Teknologi Informasi dan Strategi Bisnis,†Comput. J. Comput. Sci. Inf. Syst., vol. 3, no. 1, p. 67, 2019, doi: 10.24912/computatio.v3i1.2723.

M. Suti, M. Z. Syahdi, and D. D., “Tata Kelola Perguruan Tinggi dalam Era Teknologi Informasi dan Digitalisasi,†JEMMA (Journal Econ. Manag. Accounting), vol. 3, no. 2, p. 203, 2020, doi: 10.35914/jemma.v3i2.635.

S. Hasan and N. Muhammad, “Sistem Informasi Pembayaran Biaya Studi Berbasis Web Pada Politeknik Sains Dan Teknologi Wiratama Maluku Utara,†IJIS - Indones. J. Inf. Syst., vol. 5, no. 1, pp. 44–55, 2020, doi: 10.36549/ijis.v5i1.66.

F. Anggraini and A. Budiarti, “Pengaruh Harga, Promosi, dan Kualitas Pelayanan Terhadap Loyalitas Pelanggan Dimediasi Kepuasan Pelanggan Pada Konsumen Gojek,†J. Pendidik. Ekon., vol. 8, no. 3, pp. 86–94, 2020, doi: 10.26740/jupe.v8n3.p86-94.

A. Ibrahim et al., “Pengaruh Customer Relationship Management (CRM) Terhadap Loyalitas Pelanggan Unipin,†J. Inf. Syst. Res., vol. 3, no. 1, pp. 1–6, 2021, doi: 10.47065/josh.v3i1.989.

D. Rahmatya, S. Yulina, Y. Dewi, and L. Widyasari, “Rancang Bangun Aplikasi Penerapan Customer Relationship Management ( CRM ) Untuk Menjaga Loyalitas Pelanggan ( Studi Kasus : Magenta Coklat , Padang ) Kamal , Mursityo , & Herlambang ( 2018 ) dengan melakukan penelitian mengenai Pengembangan Sistem Inform,†vol. 12, no. 2, pp. 2033–2045, 2020.

N. Lembongan and K. N. Penida, “DOI : https://doi.org/10.24843/EJMUNUD.2019.v08.i11.p20 ISSN : 2302-8912 PERAN KEPUASAN PELANGGAN DALAM MEMEDIASI KUALITAS PELAYANAN TERHADAP LOYALITAS PELANGGAN Fakultas Ekonomi dan Bisnis Universitas Udayana ( Unud ), Bali , Indonesia Berbagai keindahan,†vol. 8, no. 11, pp. 6782–6803, 2019.

N. Novianti, E. Endri, and D. Darlius, “Kepuasan Pelanggan Memediasi Pengaruh Kualitas Pelayanan Dan Promosi Terhadap Loyalitas Pelanggan,†Mix J. Ilm. Manaj., vol. 8, no. 1, p. 90, 2018, doi: 10.22441/mix.2018.v8i1.006.

R. Wahyuni and H. Irawan, “Penerapan Electronic Customer Relationship Management (E-CRM) Untuk Meningkatkan Loyalitas Dan Pelayanan Terhadap Customer Pada Astrido Daihatsu Otista,†J. Idealis, vol. 1, no. 1, pp. 489–496, 2018, [Online]. Available: http://jom.fti.budiluhur.ac.id/index.php/IDEALIS/article/view/1353/.

K. Tanpa and Alumni, “Pengaruh Customer Relationship Management dan Kualitas Pelayanan terhadap Kepuasan Pelanggan,†J. Dig. Mark., vol. 3, no. 1, pp. 79–85, 2018.

J. P. Wildyaksanjani and D. Sugiana, “Strategi Customer Relationship Management (CRM) PT Angkasa Pura II (Persero),†J. Kaji. Komun., vol. 6, no. 1, p. 10, 2018, doi: 10.24198/jkk.v6i1.8754.

C. Sylvia and A. Angela, “Perencanaan Strategis Sistem Dan Teknologi Informasi Pada Stmik – Stie Mikroskil Menggunakan Metode Ward & Peppard,†Sebatik, vol. 23, no. 2, pp. 592–603, 2019, doi: 10.46984/sebatik.v23i2.816.

E. Yulianto and A. Mauludin, “ANALISIS ARSITEKTUR & FUNGSIONAL OPENBRAVO 3.0 ERP DAN PENERAPANNYA MENGGUNAKAN METODE EUP Erwin Yulianto Amras Mauludin,†vol. IX, no. 2, pp. 114–128, 2017.

A. K. Sudiarto, K. Aelani, and F. D. Juniar, “Identifikasi Penyakit pada Daun Jambu Kristal Berbasis Android dengan Metode Enterprise Unified Process,†Jt. (Journal Inf. Technol., vol. 02, no. 01, pp. 1–8, 2020.

P. Sokibi and I. K. W. Adnyana, “Perencanaan Pengembangan Aritektur Sistem Informasi Perguruan Tinggi Menggunakan Metode Enterprise Unified Process (EUP),†vol. 1, no. 2, pp. 90–99, 2018.

R. Anderson and J. F. Andry, “Perancangan Enterprise Arsitektur Menggunakan Framework Togaf,†Ultim. InfoSys J. Ilmu Sist. Inf., vol. 12, no. 1, pp. 58–66, 2021, doi: 10.31937/si.v12i1.1801.

Downloads

Published

2022-07-25

Issue

Vol. 6 No. 3 (2022): Juli 2022

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).