Rancang Bangun Sistem Monitoring Pengolahan Limbah Cair Tahu Di Kabupaten Purbalingga Berbasis Internet of Things

Authors

  • Garichwan Fathurrahman Arafat Institut Teknologi Telkom Purwokerto, Banyumas
  • Aditya Wijayanto Institut Teknologi Telkom Purwokerto, Banyumas
  • Novian Adi Prasetyo Institut Teknologi Telkom Purwokerto, Banyumas

DOI:

https://doi.org/10.30865/mib.v6i3.3863

Keywords:

Turbidity Sensor, Telegram Bot, NodeMCU ESP8266, Waste Treatment, Internet of Things

Abstract

In the production of tofu, it usually produces liquid waste which can cause environmental pollution when no processing is carried out which will have an impact on local residents. Disposal of liquid waste from the production of tofu without going through processing will result in air pollution in the form of a pungent odor and too low oxygen and pollution in the water which will become dirty. Liquid waste generated from the production of tofu contains organic substances that cause microbial growth in the water which results in decreased oxygen levels in the water and the water becomes cloudy. Based on these problems, a monitoring system for turbidity and acid-base levels of the tofu industrial wastewater in Purbalingga Regency based on the Internet of Things was designed by utilizing the NodeMCU ESP8266 which is connected to a Turbidity sensor, pH sensor, DS18B20 sensor, LCD 16x2 I2C, relay, and a water pump that will connected to the Telegram Bot for monitoring and control. Telegram bots can work when Telegram and the network are turned on and connected to the internet. From the results of testing the system produces tools that are in accordance with what the author expects. All sensors and relays can work well on the waste onjek, the water pump also works well so that it can carry out waste disposal when the turbidity level has reached less than 35 which is carried out after the decomposition process is complete. The system can also send notifications to the Telegram Bot when the pump is on and when commands are requested via the gadget, resulting in the conclusion that the system works in real time and must be connected to the internet network.

References

R. Dwi Ratnani, I. Hartati, and L. Kurniasari, “Laporan penelitian terapan pemanfaatan eceng gondok (eichornia crassipes) untuk menurunkan kandungan COD(chemical oxygen demond), ph, bau, dan warna pada limbah cair tahu,†J. Lingkung., vol. 2, pp. 1–49, 2012, [Online]. Available: https://publikasiilmiah.unwahas.ac.id/index.php/LPPM/article/view/837/950.

Dr. Muhammad Ikhtiar, Pengantar Kesehatan Lingkungan Dr . Muhammad Ikhtiar , SKM , M . Kes, no. July. 2018.

I. M. Erwin, “PERANCANGAN SISTEM MONITORING PENGOLAHAN LIMBAH CAIR PADA IPAL,†Inkom, vol. I, pp. 66–70, 2017, [Online]. Available: https://www.ipalrobot.com/.

S. Santoso, “RANCANG BANGUN SIMULATOR PEMBACA PH LIMBAH INDUSTRI CAIR BERBASIS MIKROKONTROLER ATMEGA8535,†no. November, 2009.

Mario Orlando, Desta Yolanda, and Werman Kasoep, “Sistem Monitoring dan Penjernihan Air Berdasarkan Derajat Keasaman (PH) dan Kekeruhan Pada Bak Penampungan Air Berbasis Internet of Things,†Chipset, vol. 1, no. 01, pp. 17–22, 2020, doi: 10.25077/chipset.1.01.17-22.2020.

M. T. O. A. Pamungkas, “Studi Pencemaran Limbah Cair Dengan Parameter Bod5 Dan Ph Di Pasar Ikan Tradisional Dan Pasar Modern Di Kota Semarang,†J. Kesehat. Masy., vol. 4, no. 2, pp. 166–175, 2016.

J. Ambarita, R. A. P, and A. S. Wibowo, “RANCANG BANGUN PROTOTIPE SMARTHOME BERBASIS INTERNET OF THINGS ( IoT ) MENGGUNAKAN APLIKASI BLYNK DENGAN MODUL ESP 8266 DESIGN SMARTHOME PROTOTYPE BASED ON IOT USING BLYNK APPLICATION WITH THE ESP MODULE 8266 internet technology and other communication me,†vol. 6, no. 2, pp. 3006–3013, 2019.

Y. Setiawan, “RANCANG BANGUN PEMANTAUAN DAN PENJADWALAN ALAT PEMBERI PAKAN IKAN OTOMATIS SECARA JARAK JAUH,†ВеÑтник РоÑздравнадзора, vol. 6, pp. 5–9, 2017.

A. Qalit and A. Rahman, “Rancang Bangun Prototipe Pemantauan Kadar Ph Dan Kontrol Suhu Serta Pemberian Pakan Otomatis Pada Budidaya Ikan Lele Sangkuriang Berbasis Iot,†J. Karya Ilm. Tek. Elektro, vol. 2, no. 3, pp. 8–15, 2017.

A. Noor, “Aplikasi Pendeteksi Kualitas Air Menggunakan Turbidity Sensor Dan Arduino Berbasis Web Mobile,†Joutica, vol. 5, no. 1, p. 316, 2020, doi: 10.30736/jti.v5i1.329.

M. Irsyam, “Sistem Otomasi Penyiraman Tanaman Berbasis Telegram,†Sigma Tek., vol. 2, no. 1, p. 81, 2019, doi: 10.33373/sigma.v2i1.1834.

P. I. A. Guna, I. M. A. Suyadnya, and I. G. A. P. R. Agung, “Sistem Monitoring Penetasan Telur Penyu Menggunakan Mikrokontroler NodeMCU ESP8266 dan Protokol MQTT dengan Notifikasi Berbasis Telegram Messenger,†J. Comput. Sci. Informatics Eng., vol. 2, no. 2, p. 80, 2018, doi: 10.29303/jcosine.v2i2.135.

H. Wicaksono, “Relay – Prinsip dan Aplikasi,†Univ. Kristen Petra, pp. 1–12, 2009.

V. R. Juniardy, “Prototype alat penyemprot air otomatis pada kebun pembibitan sawit berbasis sensor kelembaban dan mikrokontroler AVR ATMEGA8,†Coding Sist. Komput., vol. 02, no. 3, pp. 1–10, 2014.

S. Mluyati and S. Sadi, “INTERNET OF THINGS (IoT) PADA PROTOTIPE PENDETEKSI KEBOCORAN GAS BERBASIS MQ-2 dan SIM800L,†J. Tek., vol. 7, no. 2, 2019, doi: 10.31000/jt.v7i2.1358.

D. A. A. Novitasari, D. Triyanto, and I. Nirmala, “Rancang Bangun Sistem Monitoring pada Limbah Cair Industri Berbasis Mikrokontroler dengan Antarmuka Website,†Coding J. Komput. dan Apl. Untan, vol. 06, no. 03, pp. 43–53, 2018.

F. Djuandi, “Pengenalan Arduino,†E-book. www. tobuku, pp. 1–24, 2011, [Online]. Available: http://www.tobuku.com/docs/Arduino-Pengenalan.pdf.

Downloads

Published

2022-07-25

Issue

Vol. 6 No. 3 (2022): Juli 2022

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).