Prototype Sterilisasi Virus Barang Belanjaan Online Berbasis Arduino
DOI:
https://doi.org/10.30865/mib.v6i1.3437Keywords:
Corona Virus, Droplets, Arduino Uno, Heating BoxAbstract
In this study, efforts were made to break the chain of spread of COVID-19 with the main technique of heating to dry the liquid on the surface of the groceries. Built a heating box with a length of width and height of 65cm using the main material of fiber glass with a thickness of 3mm. By using Arduino Uno as a control tool, the MLX temperature sensor is used to measure the temperature in the box and the Proximity sensor is used as a sensor to detect goods. The method used to design the tool is the Research and Development (R&D) method. The test results using an initial temperature of 47º and the desired temperature of 56ºC takes 07 minutes 21 seconds the temperature displayed by the LCD has reached 56ºC, when the surface temperature of the goods is measured using a thermogun, the results are 43.1ºC. Complete trial using an initial temperature of 29ºC and the desired temperature of 56ºC takes 2 minutes 18 seconds, the temperature displayed on the LCD has reached 56ºC. When the surface temperature of the goods is measured using a thermogun, the results are 55.5ºC. The results of the last test show that the temperature is close to 56ºC.References
D. R. Hidayatullah, A. Darmawan, and S. Kallidumban, “Finding the Strategy After Corona Crisis: The New Normal and Resilient Economy Growth in Indonesia,†Int. J. Econ. Business, Entrep., vol. 3, no. 1, pp. 64–79, 2020, doi: 10.23960/ijebe.v3i1.71.
“data covid ntb - Penelusuran Google.†https://www.google.com/search?q=data+covid+ntb&rlz=1C1CHBD_idID831ID831&oq=data+covid+ntb&aqs=chrome..69i57j0l2j0i22i30l5.9941j0j7&sourceid=chrome&ie=UTF-8 (accessed Nov. 20, 2020).
J. P. Abraham, B. D. Plourde, and L. Cheng, “Using heat to kill SARS-CoV-2,†Rev. Med. Virol., vol. 30, no. 5, pp. 8–10, 2020, doi: 10.1002/rmv.2115.
Borg, W. R. and M. D. Gall. 1989. Educational Research: An Introduction. Fifth Edition. New York and London: Longman
“BILIK STERILISASI / DESINFECTANT†DI LINGKUNGAN FASILKOM UNIVERSITAS SRIWIJAYA, Bilik Sterisasi, vol. 1. Palembang: Rossi Passarella, 2020.
J. Bakkelund et al., “PERANCANGAN KIPAS ANGIN PENGATUR SUHU DAN KELEMBAPAN RUANGAN DENGAN METODE FUZZY SUGENO BERBASIS ARDUINO,†J. Mater. Process. Technol., vol. 1, no. 1, pp. 1–8, 2018, doi: 10.1109/robot.1994.350900.
Y. Köksal and S. Penez, “Rancang Bangun Alat Pengering Rambut Otomatis Menggunakan Deret Sensor Berbasis Mikrokontroler Atmega 8535 Laporan,†Metrologia, vol. 53, no. 5, pp. 1–116, 2015, doi: 10.1590/s1809-98232013000400007.
K. Fatmawati, E. Sabna, and Y. Irawan, “Rancang Bangun Tempat Sampah Pintar Menggunakan Sensor Jarak Berbasis Mikrokontroler Arduino,†Riau J. Comput. Sci., vol. 6, no. 2, pp. 124–134, 2020.
B. Supriyo, S. B. Kuntardjo, and Sihono, “Alat Peraga Kendali Pemanas Udara Berbasis Arduino Uno Sebagai Penunjang Praktikum Laboratorium Kendali,†J. Sains dan Teknol., vol. 1, no. 1, pp. 1–14, 2017, [Online]. Available: https://ojs.uph.edu/index.php/FaSTJST/article/view/730.
D. Purnamasari, “Perancangan Kotak Pendingin dan Penghangat Minuman Menggunakan Modul Termoelektrik Peltier TEC1-12706 Berbasis Mikrokontroler Arduino Uno,†p. 46, 2017.
F. I. Putra and A. B. Pulungan, “Alat Pengering Biji Pinang Berbasis Arduino,†vol. 6, no. 1, pp. 89–97, 2020.
D. . Michael and D. Gustina, “Rancang Bangun Prototype Monitoring Kapasitas Air Pada Kolam Ikan Secara Otomatis Dengan Menggunakan Mikrokontroller Arduino,†IKRA-ITH Inform., vol. 3, no. 2, pp. 59–66, 2019.
F. Imas, “Meningkatkan Keterampilan Literasi Informasi Siswa Melalui Penguasaan Konsep Materi Virus Pada Pembelajaran Biologi. BERORIENTASI WIKIPEDIA,†2019.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
