Implementasi Metode Weighted Product dan Pembobotan Rank Order Centroid Dalam Pemberian Penghargaan Predikat Kader Terbaik
DOI:
https://doi.org/10.30865/mib.v6i1.3375Keywords:
Decision Support System, Ikatan Mahasiswa Muhammadiyah, Weighted Product, Best Cadre, Rank Order CentroidAbstract
This study discusses the process of awarding the best cadres by utilizing a decision support system using the Weighted Product method and the criteria weighting method using the Rank Order Centroid to obtain the weighting of the criteria systematically with the case studies studied, namely the Leadership of the Commissariat of Muhammadiyah Students, Faculty of Computer Science, University of Muhammadiyah Riau. The procedure carried out in awarding the best cadres by using several alternative data samples and several criteria related to the assessment. The number of alternative data used to be tested in this study were 10 samples of alternative data and 5 assessment criteria. The criteria used are Activeness (K1), Level of Training (K2), Grade Point Average (K3), Leadership (K4), and Teamwork (K5). The results obtained after testing are A6 as the best alternative with the final value obtained of 0.3398 and declared as the best cadre. The Weighted Product method and assisted by the Rank Order Centroid weighting method are able to make decisions for awarding the best cadres to the Commissariat Leaders of the Muhammadiyah Student Association, Faculty of Computer Science, University of Muhammadiyah Riau.References
M. H. Rifqo, D. A. Prabowo, and J. Dernata, “Sistem Pendukung Keputusan untuk Pemberian Reward Kader Terbaik Organisasi Ikatan Mahasiswa Muhammadiyah Kota Bengulu Menggunakan Algoritma Simple Additive Weighting,†Journal of Technopreneurship and Information System (JTIS), vol. 2, no. 2, pp. 81–88, 2019, doi: 10.36085/jtis.v2i2.372.
S. Sonang S and A. T. Purba, “Implementasi Topsis Dalam Pemberian Reward Guru Terbaik Pada Smk Swasta 1 Hkbp Pematangsiantar,†Jurnal Teknik Informasi dan Komputer (Tekinkom), vol. 4, no. 1, pp. 1–8, 2021, doi: 10.37600/tekinkom.v4i1.226.
A. I. Lubis, P. Sihombing, and E. B. Nababan, “Comparison SAW and MOORA Methods with Attribute Weighting Using Rank Order Centroid in Decision Making,†2020 3rd International Conference on Mechanical, Electronics, Computer, and Industrial Technology (MECnIT) Comparison, pp. 127–131, 2020.
M. M. Aliy Hafiz, “Sistem Pendukung Keputusan Pemilihan Karyawan Terbaik Dengan Pendekatan Weighted Product,†Cendikia, vol. 15, no. 2, pp. 23–28, 2018.
A. C. Yudistira and Y. S. Sari, “Sistem Pendukung Keputusan Menggunakan Metode Weighted Product untuk Pemilihan Karyawan Terbaik UMKM ZainToppas,†Jurnal Sisfokom (Sistem Informasi dan Komputer), vol. 9, no. 2, pp. 229–235, 2020, doi: 10.32736/sisfokom.v9i2.870.
R. Khalida, B. Bangun, and N. Oktari, “Penerapan Metode ROC dan Weighted Aggregated Sum Product Assesment ( WASPAS ) dalam Penerimaan Asisten Perkebunan,†vol. 5, pp. 937–944, 2021, doi: 10.30865/mib.v5i3.3092.
Yendrizal, “Penentuan Siswa SMK Kimia Analisa Terbaik Yang Akan Dikirim Mengikuti Olimpiade Kimia Tingkat Nasional Menerapkan Metode Entropy dan MOORA,†Jurnal Media Informatika Budidarma, vol. 4, pp. 963–969, 2020, doi: 10.30865/mib.v4i4.2350.
R. Akbar, “Perancangan Aplikasi Perangkingan Perguruan Tinggi Menggunakan Fuzzy Simple Additive Weighting (SAW) (Studi Kasus: 25 PT Wilayah Kopertis XIII Provinsi Aceh),†Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi), vol. 2, no. 1, p. 1, 2018, doi: 10.35870/jtik.v2i1.41.
A. Prabowo, S. Sawaluddin, and A. Candra, “Komparasi Metode Simple Additive Weighting dan Weighted Product dengan Kombinasi Pembobotan Atribut Information Gain,†InfoTekJar: Jurnal Nasional …, vol. 2, 2021, [Online]. Available: https://jurnal.uisu.ac.id/index.php/infotekjar/article/view/3657.
S. D. Saraswati, “Sistem Pendukung Keputusan Pemilihan Karyawan Terbaik Dengan Pendekatan Weighted Product (Studi Kasus Pada PT Republika Media Mandiri Jakarta),†Jurnal Riset Komputer (JURIKOM), vol. 6, no. 5, pp. 470–476, 2019.
S. Supiyandi, R. N. Fuad, and ..., “Sistem Pendukung Keputusan Pemberian Kredit Koperasi Menggunakan Metode Weighted Product,†JURNAL MEDIA INFORMATIKA BUDIDARMA, vol. 4, pp. 1132–1139, 2020, doi: 10.30865/mib.v4i4.2367.
D. C. Yoni and H. Mustafidah, “Penerapan Metode WP (Weighted Product) Untuk Pemilihan Mahasiswa Lulusan Terbaik di Fakultas Teknik Universitas Muhammadiyah Purwokerto,†Juita, vol. IV, no. 1, pp. 22–27, 2016.
N. A. Syafitri, Sutradi, and A. P. Dewi, “Penerapan Metode Weighted Product Dalam Sistem Pendukung Keputusan Pemilihan Laptop Berbasis Web,†semanTIK, vol. 2, no. 1, pp. 169–176, 2019.
M. Badaruddin, “Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Menerapkan Kombinasi Metode Simple Additive Weighting (SAW) dengan Rank Order Centroid (ROC),†Jurnal Media Informatika Budidarma, vol. 3, no. 4, p. 366, 2019, doi: 10.30865/mib.v3i4.1508.
T. Panggabean and Y. F. Manalu, “Penerapan Metode Simple Additive Weighting ( SAW ) dalam Pemberian Reward Bagi Pegawai Honorer Menggunakan Pembobotan Rank Order Centroid,†vol. 5, pp. 1667–1673, 2021, doi: 10.30865/mib.v5i4.3146.
S. Silvilestari, “Penerapan Kombinasi Metode Simple Additive Weighting (SAW) dan Rank Order Centroid (ROC) dalam Keputusan Pemberian Kredit,†Jurnal Media Informatika Budidarma, vol. 3, no. 4, p. 371, 2019, doi: 10.30865/mib.v3i4.1509.
M. Simarmata, A. Saleh, and M. B. Akbar, “PENERAPAN METODE SMARTER DALAM SISTEM PENDUKUNG KEPUTUSAN MENENTUKAN KUALITAS GETAH KARET ( STUDI KASUS : PTPN III MEDAN ),†Jurnal Masyarakat Telematika dan Informasi, vol. 10, no. 1, pp. 13–25, 2019.
L. Handayani, M. Syahrizal, and K. Tampubolon, “Pemilihan Kepling Teladan Menerapkan Metode Rank Order Centroid (Roc) Dan Metode Additive Ratio Assessment (Aras) Di Kecamatan Medan Area,†KOMIK (Konferensi Nasional Teknologi Informasi dan Komputer), vol. 3, no. 1, pp. 532–538, 2019, doi: 10.30865/komik.v3i1.1638.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
