Optimization of Piezoelectric Sensor Based Lighting Power Management Using Fuzzy Logic Mamdani

Authors

  • Devani Adi Permana Telkom University, Bandung
  • Rahmat Yasirandi Telkom University, Bandung
  • Dita Oktaria Telkom University, Bandung

DOI:

https://doi.org/10.30865/mib.v5i4.3248

Keywords:

Piezoelectric Sensor, IoT, PLN, Smart Lighting, LDR Sensor, Fuzzy Logic

Abstract

Information is a very important thing from time to time. Lighting is needed by humans to support their daily activities. The problem of the lighting sector today is energy efficiency which is still not resolved. Where the use of electricity for lighting is still using old technology that is not environmentally friendly and costs a lot of money per month. One of the concepts of IoT, namely smart lighting, emerged as a solution to overcome problems in the lighting sector. However, the current smart lighting still requires a direct power source from the government (PLN), In addition, sectors such as tourist attractions in rural areas still need to be considered because there are still many areas that do not have a power source that can be used for street lighting. the tourist attraction. So we need a smart lighting technology that can produce its own power source to reduce the electricity costs that must be incurred. This study aims to build a tool or device that can manage and optimize the energy expended by building an IoT device using a piezoelectric sensor as the main material to generate an electric field that will produce electrical energy for lighting or lighting in rural tourist destinations and using fuzzy algorithms. Mamdani logic is a determinant of the intensity of the light obtained from the light sensor on the IoT device. The overall results of the system that has been built can work properly and the Mamdani fuzzy algorithm can be used properly with an accuracy of 93% power saving at the time of testing. In addition, the monitoring system built is also following the data obtained from the system. The suitability between the fuzzy system and Matlab as a whole is in accordance with the value of 100%

References

M. Afif and N. P. Rini, “Rancang Bangun Instalasi Lampu Pju Termodifikasi Ldr Berbasis Material Piezoelektrik Pada Polisi Tidur,†J. Fis. FLUX, vol. 14, no. 2, p. 85, 2018, doi: 10.20527/flux.v14i2.3930.

Y. Ikhsan, “Rancang Bangun Sistem Pengendali Lampu Pju Berbasis Mikrokontroller Atmega328 Menggunakan Metode Fuzzy Mamdani,†pp. 1–94, 2015.

D. S. Putra, N. B. A. K, R. Mayasari, S. T. Telekomunikasi, F. T. Elektro, and U. Telkom, “Rancang Bangun Smart Lighting Dan Monitoring Kondisi Lampu Jalan Berbasis Wireless Sensor Network Menggunakan Lora,†e-Proceeding Eng., vol. 6, no. 2, pp. 4748–4755, 2019.

F. S. Putranta, Y. G. Bisono, and I. R. Munadi, “Perancangan Dan Analisa Smart Lighting Berbasis Wireless Sensor Network Untuk Meningkatkan Kenyamanan Aktivitas Di Dalam Rumah Analisys and Design Smart Lighting Based on Wireless Sensor Network To Improve Comfort of Activity At Home,†vol. 4, no. 3, pp. 3430–3437, 2017.

A. M. Rahmani, P. Liljeberg, J. S. Preden, and A. Jantsch, “Fog computing in the Internet of Things: Intelligence at the edge,†Fog Comput. Internet Things Intell. Edge, pp. 1–172, 2017, doi: 10.1007/978-3-319-57639-8.

A. Jantsch et al., “Hierarchical dynamic goal management for IoT systems,†Proc. - Int. Symp. Qual. Electron. Des. ISQED, vol. 2018-March, pp. 370–375, 2018, doi: 10.1109/ISQED.2018.8357315.

J. Liu, W. Zhang, X. Chu, and Y. Liu, “Fuzzy logic controller for energy savings in a smart LED lighting system considering lighting comfort and daylight,†Energy Build., vol. 127, pp. 95–104, 2016, doi: 10.1016/j.enbuild.2016.05.066.

C. Danuputri and M. Kom, “INTENSITAS LAMPU DENGAN FUZZY LOGIC MAMDANI Determination Of Wind Fan Speed And Lamp Intensity With Mamdani Fuzzy Logic,†no. 2, pp. 275–283, 2020.

M. Seminar and T. Akhir, “Aplikasi Sensor,†pp. 43–47.

W. Hendrowati, L. G. Harus, and I. N. Sutantra, “Pemodelan Dan Analisa Respon Getaran Kendaraan Akibat Pemasangan Makanisme Multilayer Piezoelectric Vibration Energy Harvesting,†Digilib.Mercubuana.Ac.Id, 2012, [Online]. Available: http://digilib.mercubuana.ac.id/manager/t!@file_artikel_abstrak/Isi_Artikel_563620093045.pdf.

R. P. Prasetya, “Implementasi Fuzzy Mamdani Pada Lampu Lalu Lintas Secara Adaptif Untuk Meminimalkan Waktu Tunggu Pengguna Jalan,†J. Mnemon., vol. 3, no. 1, pp. 24–29, 2020, doi: 10.36040/mnemonic.v3i1.2526.

M. I. Mowaviq, A. Junaidi, and S. Purwanto, “Lantai Permanen Energi Listrik Menggunakan Piezoelektrik,†Energi & Kelistrikan, vol. 10, no. 2, pp. 112–118, 2019, doi: 10.33322/energi.v10i2.219.

R. M. Ratih, M. I. Yasyak, H. Nugroha, and U. Fadlilah, “Powerbank Piezoelektrik menggunakan Tekanan Tangan,†Emit. J. Tek. Elektro, vol. 20, no. 1, pp. 55–60, 2019, doi: 10.23917/emitor.v20i1.8597.

M. Maslim, B. Y. Dwiandiyanta, and N. Viany Susilo, “Implementasi Metode Logika Fuzzy dalam Pembangunan Sistem Optimalisasi Lampu Lalu Lintas,†J. Buana Inform., vol. 9, no. 1, pp. 11–20, 2018, doi: 10.24002/jbi.v9i1.1661.

C. Danuputri, L. Hakim, W. S. Susilo, F. D. Samuel, J. Lodan, and R. No, “Mikrokontroler Dan Algoritma Fuzzy Mamdani,†vol. 3, no. 2, pp. 94–107, 2020.

V. M. Nasution and G. Prakarsa, “Optimasi Produksi Barang Menggunakan Logika Fuzzy Metode Mamdani,†J. Media Inform. Budidarma, vol. 4, no. 1, p. 129, 2020, doi: 10.30865/mib.v4i1.1719.

P. Juniana and L. Hakim, “Kendali Lampu Lalu Lintas Dengan Menggunakan Metode Fuzzy Logic Mamdani,†J. Terap. Teknol. Inf., vol. 3, no. 1, pp. 1–10, 2019, doi: 10.21460/jutei.2018.31.126.

Downloads

Published

2021-10-26

Issue

Vol. 5 No. 4 (2021): Oktober 2021

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).