Penerapan Metode Simple Additive Weighting (SAW) pada Sistem Informasi Pemilihan Asisten Praktikum

Authors

  • Muhamad Azrino Gustalika Institut Teknologi Telkom Purwokert, Purwokerto
  • Diovianto Putra Rakhmadani Institut Teknologi Telkom Purwokert, Purwokerto
  • Alon Jala Tirta Segara Institut Teknologi Telkom Purwokert, Purwokerto

DOI:

https://doi.org/10.30865/mib.v5i3.3065

Keywords:

Assistant Practikum, Simple Additive Weighting, Website, Laboratory, Informatics

Abstract

Each campus has technology that is used to communicate and exchange information using technology in the form of a website. The use of the website itself has penetrated into the world of education, one of which is the laboratory on campus. Laboratory on campus cannot be separated from the existence of a practicum assistant. Every semester the faculty of informatics opens registration for practicum assistants, but there are obstacles that candidates who register still use the manual method in their selection. So they need the Simple Additive Weighting (SAW) method. This study uses the Simple Additive Learning method which will increase the highest score level of 1.39 with the weight indicator used in the selection of practicum assistants and get an average score of 4.9 out of 5.0 so that it is very effective for admins (laborers) to manage and lecturers, to see recommendations for prospective practicum assistants, the best are web-based

References

Widiatry, “Rancang Bangun Website Sistem Informasi Praktikum Jurusan Teknik Informatika Universitas Palangkaraya,†J. Saintekom, vol. 6, pp. 12–24, 2016.

M. Yumarlin, “Evaluasi Penggunaan Website Universitas Janabadra dengan Menggunakan Metode Usability Testing,†J. Inf. Interaktif, vol. 1, no. 1, pp. 34–43, 2016.

A. Andi Christian, Sebri Hesinto, “Rancang Bangun Website Sekolah Dengan Menggunakan Framework Bootstrap ( Studi Kasus SMP Negeri 6 Prabumulih ),†SISFOKOM, vol. 07, pp. 22–27, 2018.

A. N. Ompusunggu and L. Sitorus, “Sistem Pendukung Keputusan Seleksi Penerimaan Asisten Praktikum menggunakan Metode Fuzzy Tsukamoto,†Media Inf. Anal. dan Sist., vol. 3, no. 2, pp. 185–189, 2018.

Y. Sulviyana, A. Tejawati, and U. Hairah, “CALON ASISTEN PRAKTIKUM MENGGUNAKAN METODE SMART,†Semin. Nas. Ilmu Komput. dan Teknol. Inf., vol. 2, no. 2, pp. 1–5, 2017.

D. Kurniawaty, S. K. Sari, I. Cholissodin, F. Ilmu, and K. Universitas, “IMPLEMENTASI METODE NAÃVE BAYES CLASSIFIER UNTUK SELEKSI,†J. Teknol. Inf. dan Ilmu Komput., vol. 3, no. 4, pp. 273–278, 2016.

A. Saleh, “PENERAPAN METODE SIMPLE MULTI ATTRIBUTE RATING TECHNIQUE EXPLOITING RANK DALAM SISTEM PENDUKUNG KEPUTUSAN REKRUTMEN ASISTEN LABORATORIUM KOMPUTER Application of Simple Multi Attribute Rating Technique Exploiting Rank Method in Decision Support System for,†J. Masy. Telemat. dan Inf., vol. 8, no. 1, pp. 1–10, 2017.

T. Mardiana, “SISTEM PENDUKUNG KEPUTUSAN PENERIMAAN ASISTEN LABORATORIUM KOMPUTER MENGGUNAKAN METODE AHP-TOPSIS,†J. ILMU Pengetah. DAN Teknol. Komput., vol. 3, no. 2, pp. 159–166, 2018.

P. . Pungkasanti, “THE PRACTICAL ASSISTANT SELECTION DECISION SUPPORT SYSTEM USING PROFILE MATCHING,†TRANSFORMATIKA, vol. 16, no. 2, pp. 175–181, 2019.

H. Baibul Tujni, “Pengembangan Perangkat Lunak Monitoring Wellies dengan metode waterfall model,†J. Ilm. Matrik, vol. 22, no. 1, pp. 122–130, 2020.

F. Supandi, W. D. P, Y. Ambar, and S. Mat, “ANALISIS RESIKO PADA PENGEMBANGAN PERANGKAT LUNAK YANG MENGGUNAKAN METODE WATERFALL DAN PROTOTYPING .,†Semin. Din. Inform., vol. 2018, no. Senadi, pp. 83–86, 2018.

L. Wali, M; Ahmad, “Perancangan Aplikasi Source code library Sebagai Solusi Pembelajaran Pengembangan Perangkat Lunak,†J. Teknol. Inf. dan Komun., vol. 1, no. 1, 2017.

A. D. L. Intan Putri Pratiwi, FX. Ferdinandus, “Sistem Pendukung Keputusan Penerima Program Keluarga Harapan (PKH) Menggunakan Metode Simple Additive Weighting,†CAHAYAtéch, vol. 8, no. 2, 2019.

I. J. T. Situmeang, S. Hummairoh, S. M. Harahap, and Mesran, “Application of SAW ( Simple Additive Weighting ) for the Selection of Campus Ambassadors,†IJICS (International J. Informatics Comput. Sci., vol. 5, no. 1, pp. 21–28, 2021.

S. K. Simanullang and A. G. Simorangkir, “Sistem Pendukung Keputusan Penerimaan Calon Karyawan Menggunakan Metode Simple Additive Weighting,†TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 472–478, 2021.

M. R. Ramadhan, M. K. Nizam, and Mesran, “Penerapan Metode SAW (Simple Additive Weighting) Dalam Pemilihan Siswa-Siswi Berprestasi Pada Sekolah SMK Swasta Mustafa,†TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 459–471, 2021.

J. Simarmata, T. Limbong, and M. Aritonang, “SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN GURU BIDANG STUDI KOMPUTER MENGGUNAKAN METODE SIMPLE ADDITIVE WEIGHTING ( SAW ),†CESS (Journal Comput. Eng. Syst. Sci., vol. 3, no. 2, pp. 186–190, 2018.

T. Limbong et al., Sistem Pendukung Keputusan: Metode & Implementasi. Medan: Yayasan Kita Menulis, 2020.

R. Y. Simanullang, Melisa, and Mesran, “Sistem Pendukung Keputusan Penerima Bantuan Covid-19 Menggunakan Metode Simple Additive Weighting (SAW),†TIN Terap. Inform. Nusant., vol. 1, no. 9, pp. 2–9, 2021.

T. A. Kurniawan, “PEMODELAN USE CASE ( UML ): EVALUASI TERHADAP BEBERAPA KESALAHAN DALAM PRAKTIK USE CASE ( UML ) MODELING : EVALUATION ON SOME PITFALLS IN PRACTICES,†J. Teknol. Inf. dan Ilmu Komput., vol. 5, no. 1, pp. 77–86, 2018.

N. Syahputri, J. K. L. Yossudarso, K. No, J. Teknik, and U. P. Utama, “RANCANGBANGUN MEDIA PEMBELAJARAN MATEMATIKA SEKOLAH DASAR KELAS 1 MENGGUNAKAN METODE DEMONSTRASI,†J. Sist. Inf. Kaputama, vol. 2, no. 1, pp. 89–95, 2018.

D. Susandi, “Sistem Penjualan Berbasis E-Commerce Menggunakan Metode Objek Oriented pada Distro Dlapak Street Wear,†J. Sist. Inf., pp. 5–8, 2017.

Downloads

Published

2021-07-31

Issue

Vol. 5 No. 3 (2021): Juli 2021

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).