Rancang Bangun Alat Penyiram Sayuran Hidroponik Menggunakan Arduino Mega 2560
DOI:
https://doi.org/10.30865/mib.v5i1.2584Keywords:
Hydroponics, Covid 19, Water, Arduino, SmartphoneAbstract
Activities suitable for planting with hydroponic systems in the midst of covid 19 pendemi are in great demand by utilizing limited land. One of the elements in suitable planting activities is water, because 70 percent of the molecules in plants are water. Water serves as the raw material of plants in the process of photosynthesis and can also keep plant moisture from withering. Currently the method of watering plants is still done manually by checking the condition of the soil, if the soil condition is dry then the new water pump is turned on for watering. But the method is considered less effective because it requires farmers to do regular checks and should not forget so that the soil does not dry so that the plants do not wither. To answer these problems in this study want to provide certainty how the plant gets enough water. One of the efforts that can be done is to make an automatic watering tool that without having to take time so as to give an efficient impact. The tool is made using Arduino Mega 2560 Components that serve as controllers in the watering system with the help of smartphones for remote control.
References
D. A. D. Nasution, E. Erlina, and I. Muda, “Dampak Pandemi COVID-19 terhadap Perekonomian Indonesia,†J. Benefita, vol. 5, no. 2, p. 212, 2020, doi: 10.22216/jbe.v5i2.5313.
W. Hadiwardoyo, “Kerugian Ekonomi Nasional Akibat Pandemi Covid-19,†Baskara J. Bus. Enterpreneursh., vol. 2, no. 2, pp. 83–92, 2020, doi: 10.24853/baskara.2.2.83-92.
I. N. Juaningsih, “Analisis Kebijakan PHK Bagi Para Pekerja Pada Masa Pandemi Covid-19 di Indonesia,†Bul. Huk. dan Keadilan, vol. 4, no. 1, pp. 189–196, 2020.
Yasrizal and I. Hasan, “Pengaruh Pembangunan Sektor Pertanian Terhadap Distribusi Pendapatan Dan Kesempatan Kerja Di Indonesia,†J. Ilmu Ekon. dan Pembang., vol. 16, no. 1, 2017, doi: 10.20961/jiep.v16i1.2320.
N. Hidayati, P. Rosawanti, F. Arfianto, and N. Hanafi, “PEMANFAATAN LAHAN SEMPIT UNTUK BUDIDAYA SAYURAN DENGAN SISTEM VERTIKULTUR,†PengabdianMu, vol. 53, no. 9, pp. 1689–1699, 2019.
A. Masduki, “Hidroponik Sebagai Sarana Pemanfaatan Lahan,†J. Pemberdaya., vol. 1, no. 2, pp. 185–192, 2017.
H. Gustia, Rosdiana, and Junaidi, “Budidaya Tanaman Sayuran pada Lahan Pekarangan dengan Teknik Vertikultur dan Hidroponik,†Pros. Semin. Nas. Pengabdi. Masy. LPPM UMJ, vol. 1, no. September 2019, pp. 1–6, 2019.
I. S. Roidah, “Pemanfaatan Lahan Dengan Menggunakan Sistem Hidroponik,†vol. 1, no. 2, pp. 43–50, 2014.
S. Hidayat, Y. Satria, and N. Laila, “Penerapan Model Hidroponik Sebagai Upaya,†J. Graha Pengabdi., vol. 2, no. 2, pp. 141–148, 2020.
G. sari merliana, “Rancang Bangun Alat Penyiram Tanaman Otomatis Menggunakan Sensor Kelembaban Tanah,†J. Electr. Technol., vol. 3, no. 1, pp. 13–17, 2018.
W. Chusniati Dhonny, “RANCANG BANGUN SISTEM PENYIRAMAN TANAMAN ANGGREK DENDROBIUM MENGGUNAKAN SENSOR SHT11 PADA FASE PEMBUNGAAN Chusniati Dhonny 1) dan Widodo 1) 1),†vol. 15, pp. 51–60, 2017.
R. B. Agung, M. Nur, and D. Sukayadi, “Menggunakan Sensor Kelembaban Tanah Berbasis Micro Contoller Atmega 328,†Cerita, vol. 5, no. 1, pp. 97–106, 2019.
A. Iskandar, M. Muhajirin, and L. Lisah, “Sistem Keamanan Pintu Berbasis Arduino Mega,†J. Inform. Upgris, vol. 3, no. 2, pp. 99–104, 2017, doi: 10.26877/jiu.v3i2.1803.
N. Azis, M. S. Hartawan, and S. Amelia, “Rancang Bangun Otomatisasi Penyiraman dan Monitoring Tanaman Kangkung Berbasis Android,†J. IKRA-ITH Inform., vol. 4, no. 3, pp. 95–102, 2020.
N. Azis, G. Pribadi, and M. S. Nurcahya, “Analisa dan Perancangan Aplikasi Pembelajaran Bahasa Inggris Dasar Berbasis Android,†J. IKRA-ITH Inform., vol. 34, no. 4, pp. 101–108, 2020.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
