Sistem Electronic Supply Chain Management Menggunakan Metode Just in Time di PT Cemara Agung Mandiri
DOI:
https://doi.org/10.30865/mib.v4i4.2338Keywords:
Electronic Supply Chain Management, Supply Chain, Textile Industry, Raw Materials, Production, FabricAbstract
In the process of developing supply chain management, it is very important for a company that produces it, so that the production can reach the end users. In meeting the demands of consumers, especially companies engaged in textiles, PT. Cemara Agung Mandiri collaborates with raw material suppliers in order to produce equipment that meets customer needs. PT. Cemara Agung Mandiri is a company engaged in the weaving and textile industry with raw materials in the form of threads through machining fabrication to produce the required fabric, but when checking the raw materials at ADM warehouse, there are often irregular in and out of goods then with irregular in and out. Raw materials often occur delays in ordering goods with suppliers, resulting in delays in the production process. The method to be used is to use the Just In Time method, which is a method that has a method of production that determines the amount based only on the number of goods that will actually be sold, needed, produced in each part exactly as needed. In order for coordination and cooperation in the company's supply chain to run smoothly, this research builds Electronic Supply Chain Management software using the just in time method at PT. Cemara Agung Mandiri.
References
A. Agustinus, A. Candra, and Z. Elisabeth Tanring, “Analisis Dan Perancangan E-SCM Pada Pt. Prima Rezeki Pertiwi,†Binus Univ., vol. 2008, no. Snati, pp. 63–70, 2008.
E. N. Hayati and M. W. Fitriyah, “Penerapan E-Supply Chain Management Pada Industri (Studi Kasus Pada PT Maitland-Smith Indonesia),†J. Ilm. Din. Tek., vol. 9, no. 2, pp. 19–33, 2015.
A. Angka, “Analisis Penerapan Electronic Supply Chain Management Pada PT Rofaca Karalmasih Abadi,†Agora - Online Grad. Humanit. J., vol. 5, no. 3, 2017.
K. Supply, C. Management, D. A. N. Strategi, P. Pt, M. Food, and A. A. Sumangkut, “Kinerja Supply Chain Management Dan Strategi Informasi Pada Pt. Multi Food Manado,†J. Ris. Ekon. Manajemen, Bisnis dan Akunt., vol. 1, no. 3, pp. 914–920, 2013.
M. Rafik, W. Witanti, and P. N. Sabrina, “Pembangunan Sistem Electronic Supply Chain Management Pada PT . Asian Cotton Industry,†pp. 18–23, 2019.
M. A. AS and N. A. Septiani, “Perancangan Sistem Informasi Akademik Menggunakan Metode Waterfall Studi Kasus: Madrasahaliya H AL-Mansyuriah Kanza Mekarjaya Tangerang,†None, vol. 13, no. 2, pp. 80–88, 2016.
S. T. Safitri and D. Supriyadi, “Rancang Bangun Sistem Informasi Praktek Kerja Lapangan Berbasis Web dengan Metode Waterfall,†J. INFOTEL - Inform. Telekomun. Elektron., vol. 7, no. 1, p. 69, 2015.
S. Royal, A. Royal, A. Syafnur, and K. Anwar, “Monitoring Proses Produksi Menggunakan E-Supply Chain Management ( Studi Kasus : Kerupuk Kulit Bunda ),†vol. 9986, no. September, pp. 3–6, 2018.
E. N. A. Romadhoni, T. Widiyaningtyas, and U. Pujianto, “Implementasi Model Waterfall Pada Pengembangan Sistem Informasi Alumni SMKN 1 Jenangan Ponorogo,†Semin. Nas. Sist. Inf. Indones., vol. 1, no. November, pp. 445–452, 2015.
G. W. Sasmito, “Penerapan Metode Waterfall Pada Desain Sistem Informasi Geografis Industri Kabupaten Tegal,†J. Inform. Pengemb. IT, vol. 2, no. 1, pp. 6–12, 2017.
H. Larasati and S. Masripah, “Analisa Dan Perancangan Sistem Informasi Pembelian Grc Dengan Metode Waterfall,†None, vol. 13, no. 2, pp. 193–198, 2017.
D. Efrianti, “Pengaruh pengendalian persediaan terhadap distribusi beras,†J. Ilm. Akunt., vol. 2, no. 1, pp. 1–6, 2014.
P. P. Konstruksi, “Metode Just In Time (JIT) Dalam Pengelolaan Persediaan Pada Pelaksanaan Proyek Konstruksi,†vol. 2, no. 7, pp. 27–35, 2011.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
