Sistem Pendeteksi Kebocoran LPG Untuk Smarthome Berbasis IoT dengan Metode Fuzzy
DOI:
https://doi.org/10.30865/mib.v4i2.1238Keywords:
Gas Leakage, Electronic Device Automation, Raspberry Pi, IoT, Fuzzy LogicAbstract
Common problems that often occur in users of LPG gas, especially LPG gas with a size of 3kg are the wrong way of installation and the leakage of gases that are not detected by the sense of human smell that often causes fires. Fires were triggered due to sparks or even by an electronic device that is still on due to manual operation of electronic devices so that users forget to shut down the device when not in use. Therefore, an integrated technology of a system that can control electronic devices automatically and monitor LPG gas leakage thereby reducing the risk of gas leaks that are not detected by the sense of smell of humans and the risk of fire due to electronic devices that continue to ignite when not in use. The sensors used in this system are PIR sensors to detect human presence and MQ6 sensors to detect the presence of leaky gas and Raspberry pi as processors based on Internet Of Things using the fuzzy logic method as the MQ6 sensor input receiver. This system will automatically turn on the lights when a human being is detected and turn off the lights when there are no humans, besides this system will also automatically turn on the buzzer as a warning when a gas leak is detected. Data received by raspberry pi will be stored on the web server and sent to the user's e-mail in the form of gas leak status and electronic device status
References
Muhardiyansyah, Yan. (2018). Kebakaran Akibat Gas 3Kg [Online]. Tersedia : https://www.merdeka.com/peristiwa/empat-warga-di-medan-terbakar-akibat-gas-3-kilogram-meledak.html [Diakses: 24 Juni 2019].
Bayu, Muhammad. (2019). Lima Ruko Terbakar Akibat Gas 3Kg Meledak [Online]. Tersedia : http://rri.co.id/post/berita/627111/daerah/lima_ruko_terbakar_akibat_tabung_gas_lpg_3_kilogram_meledak.html [Diakses: 24 Juni 2019].
Desi Nurnaningsih. (2018). Pendeteksi Kebocoran Tabung Lpg Melalui Sms Gateway Menggunakan Sensor Mq-2 Berbasis Arduino Uno, Jurnal Teknik Informatika Vol. 11 No. 2.
Yozandra, Yozi. (2017). Rancang Bangun Alat Pendeteksi Kebocoran Gas Menggunakan Arduino Dengan Notifikasi Buzzer Dan Telegram. Politeknik Negeri Padang.
Ahadiah, Siti., Muharnis, Agustiawan. (2017). Implementasi Sensor Pir Pada Peralatan Elektronik Berbasis Microcontroller. Jurnal Inovtek Polbeng. Vol 7, Pp.29-30.
Handoko, Prio. (2017). Sistem Kendali Perangkat Elektronika Monolitik Berbasis Arduino Uno R3. Seminar Nasional Sains Dan Teknologi.
Georgoulas, Dimitrios dan Keith Blow. (2009). Wireless Sensor Network Management and Functionality: An Overview. WSN vol. 4(1), pp. 257-267.
Rifansyah, Muhammad Risyad. (2017). Aplikasi Sensor Mq-6 Sebagai Pendeteksi Kebocoran Gas Elpiji. Other Thesis, Politeknik Negeri Sriwijaya. pp. 5-8.
Firnandes, Toni., dkk. (2013). Aplikasi Wireless Sensor Network (WSN) Berbasis Radio Frequency (RF) dan SMS Alert GSM. Politeknik Negeri Batam. pp.1-2.
Oktaviani, Putri Hairiani. (2015). Aplikasi Sensor Passive Infrared Receiver (Pir) Pada Sistem Monitoring Keamanan Rumah Berbasis Android Dengan Aplikasi Teamviewer. Other Thesis, Politeknik Negeri Sriwijaya. pp.6-12
Widodo, Budiharto. (2016). Machine Learning dan Computational Intelligence, 1st ed. Yogyakarta: CV. Andi Offset.
Bagus, M., B. Timur. A. Wajiansyah, and D. Nurcahyono. (2017). Penerapan Fuzzy Logic pada Behavior Based Control ( BBC ) pada Robot Quadpod, JUST TI, vol. 9, pp. 83–89.
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).