Perancangan Sistem Monitoring Tetes dan Kapasitas Cairan Infus Kamar Pasien Menggunakan ESP8266 Berbasis Website dengan Framework Laravel
Keywords:
Microcontroller, ESP8266, Infusion Liquid, Monitoring System, WebsiteAbstract
Excessive nurse workload will result in errors in carrying out their duties, including during infusion. Late replacement of infusion fluids can be fatal for the patient, therefore a monitoring system is needed. The aims and objectives of this research are to realize the drip monitoring system program and patient room infusion capacity on the device using the Arduino IDE programming and website with the Laravel framework. This research used qualitative research with experimental methods on the NodeMCU ESP8266 Microcontroller, Photoelectric Speed Count Correlation Sensor (LM393), 168x64 OLED, Push Button and Load Cell sensors. Experimental research was also carried out on the design of tool system software or on the monitoring system. Researchers use the percentage error formula to find the error rate of the sensor. The results of error findings on the Correlation Photoelectric Speed Count sensor which were carried out 5 times obtained an error error of 0.56%, and on the Load Cell sensor an error error of 0.27% was obtained. In the results of testing the entire system that was built, the percentage results were 100%. From the test results, the Correlation Photoelectric Speed Count sensor and load cell work well on the programmed NodeMCU. This is proven in testing the tool for 1 hour with a set load cell weight factor that has been determined where the Correlation Photoelectric Speed Count sensor can read the drops of infusion fluids properly, namely the tpm value will decrease slowly according to the time the drops drop due to the air inside. bags of infusion fluids continue to decrease, as well as movement and blockages in the infusion set needles. In addition, the weight of the infusion bag will continue to decrease as the infusion of fluids to the patient progresses
References
M. PENDAYAGUNAAN APARATUR NEGARA DAN REFORMASI BIROKASI, “Jabatan Fungsional perawat dan Angka Kreditnya,†pp. 1–46, 2019.
DetikNews, “Beban Kerja Perawat Berlebihan Picu Kenaikan Angka Kematian Pasien di RS,†2014. https://news.detik.com/abc-australia/d-2766714/beban-kerja-perawat-berlebihan-picu-kenaikan-angka-kematian-pasien-di-rs (accessed Nov. 26, 2022).
M. T. I. Pasang et al., “Hubungan Antara Beban Kerja Dengan Stres Kerja Pada Perawat Pelaksana Di Ruang Isolasi Covid-19 Rumah Sakit Umum Daerah Kota Kotamobagu,†J. KESMAS, vol. 11, no. 2, pp. 81–89, 2022.
S. M. Weinstein, Buku Saku Terapi Intravena, 2nd ed. Jakarta EGC, 2000.
C. Waitt, P. Waitt, and M. Pirmohamed, “Intravenous therapy,†Nursing (Lond)., 2004, doi: 10.1136/pgmj.2003.010421.
S. N. A. NIMAWATI, “GAMBARAN KEJADIAN KEKOSONGAN INFUS PADA PASIEN RAWAT INAP DI RSUD AJIBARANG,†UNIVERSITAS MUHAMMADIYAH PUWOKERTO, 2019.
Admin, Modul Pemasangan Infus. Fakultas Kedokteran Universitas Jenderal Soedirman, 2018.
I. Sucipta, J. W. Simatupang, C. Kaswandi, and I. Purnama, “Prototipe Pemantauan Tetes Cairan Infus Berbasis IoT Terkoneksi Perangkat Android,†J. Teknol. Elektro, vol. 12, no. 3, p. 113, 2021, doi: 10.22441/jte.2021.v12i3.003.
N. D. Nopriyanto, S.Kep., M.Kep, Modul Pratikum Keperawatan Dasar. PROGRAM STUDI D3 KEPERAWATAN FAKULTAS KEDOKTERAN UNIVERSITAS MULAWARMAN, 2021.
K. N. T. Yayer, W. A. Weliamto, Ph.D., I. R. Sitepu, M.Eng., and H. Pranjoto, Ph.D, “Monitoring Dan Penghentian Cairan Infus Menggunakan Timbangan Infus Digital Dengan Memanfaatkan Web Server,†Simetris J. Tek. Mesin, Elektro dan Ilmu Komput., vol. 11, no. 1, pp. 55–64, 2020, doi: 10.24176/simet.v11i1.3601.
T. S. Destiana, “ALAT MONITORING INFUS BERBASIS MIKROKONTROLER AT MEGA 2560,†Inst. Inform. DAN BISNIS DARMAJAYA BANDAR LAMPUNG, 2018.
A. Yudhana and M. D. D. Putra, “Rancang Bangun Sistem Pemantauan Infus Berbasis Android,†Transmisi, vol. 20, no. 2, p. 91, 2018, doi: 10.14710/transmisi.20.2.91-95.
R. Maharani, A. Muid, and U. Ristian, “Sistem Monitoring Dan Peringatan Pada Volume Cairan Intravena ( Infus ) Pasien Menggunakan Arduino Berbasis Website,†Komput. dan Apl., vol. 07, no. 03, pp. 97–108, 2019.
I. A. Muzar and Y. Yuliza, “Pemantauan Cairan Infus Menggunakan Metode Komunikasi Wireless,†J. Teknol. Elektro, vol. 10, no. 2, p. 111, 2019, doi: 10.22441/jte.v10i2.005.
S. Nur Khasanah, Masisyaroh, A. Nugraham, and M. Ulinnuha, “Pembuatan Alat Monitoring Infus Berbasis NodeMCU ESP8266,†J. Ilm. Inform., vol. 6, no. 2, pp. 105–110, 2021, doi: 10.35316/jimi.v6i2.1472.
L. C. Asyari and A. Budiman, “Alat Monitoring Infus Berbasis IoT,†Pros. Simp. Nas. Rekayasa Apl. Peranc. dan Ind., pp. 183–188, 2021, [Online]. Available: https://proceedings.ums.ac.id/index.php/rapi/article/view/158/158
M. SURYA JAYA, “Desain Sistem Monitoring Infus Yang Ergonomi Dan Inovatif Untuk Meningkatkan Tingkat Usabilitas,†Universitas Islam Indonesia, 2021. [Online]. Available: https://dspace.uii.ac.id/handle/123456789/36064
M. B. Umbu Kaleka, “THERMISTOR SEBAGAI SENSOR SUHU,†lIlmiah Din. Sains, vol. 1, 2017.
A. Nanda Sukdar, “Rancang Bangun Monitoring Cairan Infus Berbasis Nodemcu Esp8266,†KEMENTERIAN PERINDUSTRIAN R. I. POLITEKNIK ATI MAKASSAR, 2021. [Online]. Available: https://sisformik.atim.ac.id/media/filejudul/827revisi tutup.pdf
A. Aprianto Saputra, “SISTEM INFORMASI PENGGAJIAN PEGAWAI (STUDI KASUS DINAS SOSIAL PROVINSI SULAWESI TENGGARA),†Universitas Islam Indonesia, 2019.
