Pendukung Keputusan dalam Penilaian Pegawai Pemerintah Non Pegawai Negeri menggunakan Metode Entropy

Authors

  • Cintantya Andhita Dara Kirana Politeknik STIA LAN Bandung, Kota Bandung
  • Anggi Syahadat Harahap Politeknik STIA LAN Bandung, Kota Bandung

DOI:

https://doi.org/10.30865/jurikom.v9i1.3846

Keywords:

Supporting Decisions, Employee Assessments, Entropy Methods

Abstract

Polytechnic of STIA LAN Bandung is one of the units under the LAN RI which has a core business in the field of education that has an obligation to run the Tri Dharma of Higher Education. In running the Tri Dharma of Higher Education, Polytechnic of STIA LAN Bandung requires several supporting resources. One of the supporting resources that most determine the quality of the implementation of the Tri Dharma of Higher Education is the competence of human resources. To facilitate the decision-making process carried out by the Staffing sub-section in assessing Non-Civil Servant Government Employees (PPNPN), a form of Decision Support System is needed. In conducting employee assessments used a method, namely Entropy. Entropy method that serves to measure the weight (level of importance) on each assessment indicator. Assessment indicators, which are used include Basic Values, Performance, Insight Tests, Warning Letters, and Attendance. The dataset used is secondary data that has been obtained from the staffing sub-section of Polytechnic of STIA LAN Bandung. The data sample consisted of five non-civil servants (PPNPN). From the results of the weight calculation using the Entropy method, it was obtained that the Attendance Indicator has the largest weight value of 0.5495, followed by the Warning Letter indicator with a weight of 0.2353. Then the third largest weight is on the Performance indicator with a weight of 0.1107, followed by the Basic Value indicator with a weight of 0.0604. The smallest weight gain is generated by the Insight Test indicator of 0.0439

References

M. Gading Sadewo, A. Eriza, A. Perdana Windarto, and D. Hartama, Seminar Nasional Teknologi Komputer & Sains (SAINTEKS) Algoritma K-Means Dalam Mengelompokkan Desa/Kelurahan Menurut Keberadaan Keluarga Pengguna Listrik dan Sumber Penerangan Jalan Utama Berdasarkan Provinsi. [Online]. Available: https://www.bps.go.id.

A. Mahdang, T. S. Lamangida, and W. K. Mohi, “Analisis Pelaksanaan Penilaian Kinerja Pegawai Negeri Sipil di Lingkungan Sekretariat Dewan Provinsi Gorontalo,†Publik : Jurnal Ilmu Administrasi, vol. 5, no. 1, pp. 1–9, 2016.

Sugijono, “PENILAIAN KINERJA DALAM MANAJEMEN SUMBER DAYA MANUSIA,†ORBITH VOL. 11 NO. 3 NOVEMBER 2015, vol. 11, no. 3, pp. 214–222, 2015.

S. Setiawan, “ANALISIS CLUSTER MENGGUNAKAN ALGORITMA K-MEANS UNTUK MENGETAHUI KEMAMPUAN PEGAWAI DIBIDANG IT PADA CV. ROXED LTD,†Jurnal Pelita Informatika, vol. 7, no. 3, 2019.

L. Satlita, Y. Dan, and M. Ahdiyana, “PENILAIAN KINERJA PEGAWAI DI PEMERINTAH KOTA YOGYAKARTA,†NATAPRAJA Jurnal Kajian Ilmu Administrasi Negara, vol. 3, no. 1, pp. 43–52, 2015.

I. H. Rani and M. Mayasari, “Pengaruh Penilaian Kinerja Terhadap Kinerja Karyawan Dengan Motivasi Sebagai Variabel Moderasi,†Jurnal Akuntansi, Ekonomi dan Manajemen Bisnis, vol. 3, no. 2, pp. 164–170, 2015.

M. GALIH and S. ROHANA, “EVALUASI KEMAMPUAN DAN PENGHITUNGAN PERINGKAT SISWA MENGGUNAKAN METODE TOPSIS DAN ENTROPY,†JURNAL IDAARAH, vol. 2, no. 2, pp. 252–259, 2018.

A. E. Abbas, “Entropy Method For Adaptive Utility Elicitation,†IEEE, 2002.

M. A. Rupang and A. Kusnadi, “Implementasi Metode Entropy dan Topsis Dalam Sistem Pendukung Keputusan Pemilihan Karyawan Terbaik (Studi Kasus : Jakarta Smart City),†ULTIMA Computing, vol. X, no. 1, pp. 13–18, 2018.

A. H. Majdi, “PENERAPAN METODE PROMETHEE DENGAN ENTROPY DALAM PENGAMBILAN KEPUTUSAN UNTUK MENENTUKAN SISWA BERPRESTASI,†EDUMATIC: Jurnal Pendidikan Informatika, vol. 1, no. 2, pp. 55–64, 2017.

Jamila, “SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN SUBKONTRAK PRODUKSI SARUNG TANGAN MENGGUNAKAN METODE ENTROPY DAN TOPSIS,†in Seminar Nasional Informatika 2012 (semnasIF 2012) UPN â€Veteran†Yogyakarta, Jun. 2012, pp. 62–70.

A. Meiriza, E. L. Ruskan, and R. Zulfahmi, “Implementasi Metode Entropy dan Technique For Order Preference by Similarity to Ideal Solution (TOPSIS) dalam Pemilihan Biro Perjalanan Umroh IMPLEMENTATION OF THE ENTROPY METHOD AND TECHNIQUE FOR ORDER PREFERENCE BY SIMILARITY TO IDEAL SOLUTION (TOPSIS) IN UMRAH TRAVEL AGENCY SELECTION,†TEKNOMATIKA, vol. 09, no. 01, pp. 77–90, 2019.

E. Handoyo, A. D. Cahyani, and R. Yunitarini, “SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN PRODUK UNGGULAN DAERAH MENGGUNAKAN METODE ENTROPY DAN ELECTRE II (STUDI KASUS: DINAS KOPERASI, INDUSTRI DAN PERDAGANGAN KABUPATEN LAMONGAN),†JURNAL TEKNOLOGI TECHNOSCIENTIA, vol. 7, no. 1, pp. 22–27, 2014.

S. Rahayu, A. Juang, T. Gumilang, O. P. Bharodin, and F. Faturahman, “METODE ENTROPY-SAW DAN METODE ENTROPY-WASPAS DALAM MENENTUKAN PROMOSI JABATAN BAGI KARYAWAN TERBAIK DI CUDO COMMUNICATIONS,†Jurnal Teknologi Informasi dan Ilmu Komputer (JTIIK), vol. 7, no. 5, pp. 1069–1078, 2020, doi: 10.25126/jtiik.202072888.

S. Rizki Tanjung and M. v Siagian, “Penerapan Metode COPRAS dan ENTROPY dalam Pemilihan Anggota Badan Pengawas Pemilihan Umum (BAWASLU),†Journal of Informatics Management and Information Technology, vol. 1, no. 2, pp. 48–59, 2021, [Online]. Available: https://hostjournals.com/

C. Edi Prawiro, M. Yusril Helmi Setyawan, and S. Fachri Pane, “Studi Komparasi Metode Entropy dan ROC dalam Menentukan Bobot Kriteria,†Jurnal Tekno Insentif |, vol. 15, no. 1, pp. 48–59, 2021, doi: http://dx.doi.org/jti.v15i1.353.

A. dan I. Junaidi and Isa, “‘Implementasi Metode Entropi dan ELECETRE II untuk Menentukan Prioritas Pembangunan Kembali Jembatan yang Rusak Akibat Bencana Banjir (Studi Kasus Di Kabupaten Trenggalek)’.Surabaya : Jurusan Matematika Institut Teknologi Sepuluh.â€

Additional Files

Published

2022-02-25

How to Cite

Kirana, C. A. D., & Harahap, A. S. (2022). Pendukung Keputusan dalam Penilaian Pegawai Pemerintah Non Pegawai Negeri menggunakan Metode Entropy. JURNAL RISET KOMPUTER (JURIKOM), 9(1), 159–166. https://doi.org/10.30865/jurikom.v9i1.3846