Estimasi Biaya Perangkat Lunak Pada Aplikasi SIBIMA Universitas XYZ dengan Menggunakan Metode Function Point
DOI:
https://doi.org/10.30865/jurikom.v7i1.1893Keywords:
Academic Guidance Information System (SIBIMA), Function Point Method, Software Cost Estimation, Software Development, EffortAbstract
The growing development of computers triggers the amount of software in different amounts and uses. A system is said to be good when starting planning that can estimate the cost, time and amount of resources needed as a basis for planning a system. So that the estimated cost can be an element in an assessment. The research explains that the Academic Guidance Information System (SIBIMA) which is a system for carrying out student consultation activities with academic advisers at XYZ University. From the software cost estimation results at SIBIMA use Function Point which is a method of estimating software size using an indirect approach or indirect approach to estimate software size in Function Point units (FP), for Effort values on SIBIMA is 379,906 man / hour and it is known that the cost needed in developing SIBIMA is IDR 22,858,705 so that it can be used as a reference if the higher education institution wants to develop a software system
References
C. Riyana, “Teknologi Informasi dan Komunikasi,†Pus. Perbukuan Kementrian Pendidik. Nas., 2010.
Johan @ Eddy Luaran, “Perkembangan, Cabaran Dan Aplikasi Teknologi Maklumat Dalam Pengajaran Dan Pembelajaran,†Konf. Pendidik. Univ. Teknol. MARA – Univ. Pendidik. Indones. Bandung, 2011.
R. S. Dewi, A. P. Subriadi, and S. Sholiq, “Use Case Point - Activity-Based Costing: Metode Baru untuk Mengestimasi Biaya Pengembangan Perangkat Lunak,†Sisfo, vol. 05, no. 03, 2015.
F. Point, “Pengukuran Fungsionalitas Perangkat Lunak Menggunakan Metode Function Point Berdasarkan Dokumentasi Desain,†IJCCS (Indonesian J. Comput. Cybern. Syst., vol. 7, no. 2, pp. 111–120, 2013.
R. M. Fikri and J. Sekarsari, “Analisis Estimasi Biaya Proyek Peningkatan Jalan Beton Di Kabupaten Tangerang Dengan Metode Cost Significant Model MK-337 MK-338,†Semin. Nas. Tek. Sipil V Tahun 2015 – UMS, 2015.
Andi asnur pranata MH, “Perbandingan Estimasi Anggaran Biaya Antara Metode,†Proceeding PESAT, 2011.
R. Saptono and R. Anggrainingsih, “Development of Software Size Estimation Application using Function Point Analysis ( FPA ) Approach with Rapid Application Development ( RAD ),†ITsmart J. Ilm. Teknol. dan Inf., vol. 5, no. 2, pp. 96–103, 2016.
I. Bisnis, “Penggunaan model,†vol. 2006, pp. 337–358, 2006.
Sholiq, R. S. Dewi, and A. P. Subriadi, “A Comparative Study of Software Development Size Estimation Method: UCPabc vs Function Points,†in Procedia Computer Science, 2017.
N. Balaji, N. Shivakumar, and V. V. Ananth, “Software cost estimation using function point with non algorithmic approach,†Glob. J. Comput. Sci. Technol., vol. 13, no. 8, 2013.
R. Sarno, J. L. Buliali, and S. Maimunah, “Pengembangan Metode Analogy Untuk Estimasi Biaya Rancang Bangun Perangkat Lunak,†MAKARA Technol. Ser., vol. 6, no. 2, pp. 46–55, 2010.
A. Maddepungeng, I. Suryani, and A. Mawardani, “ESTIMASI BIAYA PADA PROYEK PERUMAHAN (Studi Kasus Proyek Pembangunan Citra Serang Residence),†J. Fondasi Jur. Tek. Sipil Univ. Sultan Ageng Tirtayasa, 2016.
A. Bakar, “Estimasi Biaya Dengan Mengunakan " Cost Significant Model " Pada Pekerjaan Jembatan Rangka Baja Di Proyek Pembangunan Jalan Lintas Selatan Provinsi Jawa Timur,†Tek. Sipil Untag Surabaya, 2014.
D. Longstreet, “Function Points Analysis Training Course,†Longstreet Consult. Inc. Acessed, vol. 2, p. 15, 2005.
R. S. Dewi, A. P. Subriadi, and Sholiq, “A Modification Complexity Factor in Function Points Method for Software Cost Estimation Towards Public Service Application,†in Procedia Computer Science, 2017.
C. J. Lokan, “Function Points,†Advances in Computers. 2005.
