Implementation of TOPSIS Method in the Selection of Candidates for the Student Skills Competition in Technical Competence Drawing Building

 Juanda Hakim Lubis (Universitas Medan Area, Medan, Indonesia)
 (*)Mesran Mesran Mail (Universitas Budi Darma, Medan, Indonesia)
 Garuda Ginting (Universitas Budi Darma, Medan, Indonesia)
 Zahri Hubby Ramadhani (Universitas Budi Darma, Medan, Indonesia)
 Delvi Syahfitri (Universitas Budi Darma, Medan, Indonesia)

(*) Corresponding Author

Submitted: November 7, 2021; Published: November 30, 2021

Abstract

The selection of prospective participants in the student skills competition is a prestigious event for all students who attend Vocational High Schools throughout Indonesia, a prospective LKS is tasked with providing the results of a job in the competence of the competition being contested.The selection of the expected LKS candidates is not easy, because the decision to accept or not LKS candidates is still carried out in the old way, namely based on the selection of teachers in the competency areas being contested. This results in inaccurate selection decision making and the results are not appropriate and not on target, for that a decision support system is needed that will later assist decision making. Decision support system with application of methodTechnique for Others Reference by Similarity to Ideal Solution (TOPSIS) It is very much needed in order to be able to help make the right decisions in determining the selection of prospective student skills competitions (LKS) on building drawing engineering competencies. Technique For Others Reference by Similarity to Ideal Solution is a multi-criteria decision-making method or alternative choice which is an alternative that has the smallest distance from the positive ideal solution and the largest distance from the negative ideal solution from a geometric point of view by using distance.TOPSIS is known that from 3 three students the higher preference value is 0.8846, so that the result of the best student selection decision is the 2nd student. and accurate so that the resulting information can be used as decision support.

Keywords


DSS; Students; Skills; Building Drawing Techniques; TOPSIS Method

Full Text:

PDF


Article Metrics

Abstract view : 257 times
PDF - 105 times

References

P. Training et al., “Yanto Rudianto, 2017 IMPLEMENTATION OF COMPETENCY-BASED TRAINING FOR PROSPECTIVE PARTICIPANTS OF COMPETENCY COMPETITION STUDENTS BID ANG PROD UCTION MACHINE Universitas Pendidikan Indonesia|repository.upi.edu|library.upi.edu," pp. 1–9, 2017.

I. Muzakkir, "Application of the topsis method for a decision support system for determining poor families in Panca Karsa Village II," vol. 9, pp. 274–281, 2017.

T. Limbong et al., Decision Support Systems: Methods & Implementation. Medan: Our Writing Foundation, 2020.

NNK Sari, W. Widiatry, and N. Chitayae, "Decision Support System for Selection of BBP-PPA Scholarship Recipients with Web-based TOPSIS Method," Anterior J., vol. 18, no. 1, pp. 86–91, 2018.

. INAAD, . IMAWSK . MC, and . DDGHDSK . M., "Development of a Decision Support System for Hotel Determination in Buleleng District Using the Analytic Hierarchy Process (Ahp) Method and Technique for Others Reference By Similarity To Ideal Solution (Topsis),"Gather. arctic. Mhs. Educator. Tech. information., vol. 7, no. 1, p. 10, 2018.

E. Nurelasari and E. Purwaningsih, "The Best Housing Selection Decision Support System with the TOPSIS Housing Selection Decision Support System Using the TOPSIS Method," J. Sis. and Technol. inf., vol. 08, no. 4, pp. 317–321, 2020.

M. Mata, K. Introduction, and S. Information, “Decision Support Systems,” 2014.

MK Kusuma, NA Hasibuan, and I. Saputra, "The Best Lecturer Selection Decision Support System Using the VIKOR Method," J. Inf. syst. res., vol. 1, no. 4, 2019.

Jasri, D. Siregar, and R. Rahim, “Decision Support System Best Employee Assessments with Technique for Order of Preference by Similarity to Ideal Solution,” int. J. Recent TRENDS Eng. res., vol. 3, no. 3, pp. 6–17, 2017.

G. Ginting, Fadlina, Mesran, APU Siahaan, and R. Rahim, “Technical Approach of TOPSIS in Decision Making,” int. J. Recent Trends Eng. res., vol. 3, no. 8, pp. 58–64, 2017.

Mesran, EP Sumantri, Supriyanto, SH Sahir, and NK Daulay, “Implementation of Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) in Recommendations for New Position in Companies,” int. J. Inf. syst. Technol., vol. 4, no. 2, pp. 661–669, 2021.

R. Khorshidi and A. Hassani, “Comparative analysis between TOPSIS and PSI methods of materials selection to achieve a desirable combination of strength and workability in Al/SiC composites,” mater. Dec., vol. 52, no. June, pp. 999–1010, 2013.

AP Windarto, "Implementation of Topsis and Saw Methods in Giving Customer Rewards," Click - Collect. J. Computer Science., vol. 4, no. 1, p. 88, 2017.

In. PU Samuel Damanik, "Implementation of ROC (Rank Order Centroid) and Waspas Methods in the Decision Support System for Vendor Cooperation Selection,"KOMIK (Nas Conference. Technol. Inf. and Computers), vol. 1, no. 1, pp. 242–241, 2020.

M. Mesran, J. Afriany, and SH Sahir, "Effectiveness of Employee Performance Assessment in Increasing Work Motivation Applying Rank Order Centroid (ROC) and Additive Ratio Assessment (ARAS) Methods," Pros. Semin. Nas. Ris. inf. science., vol. 1, no. 0, pp. 813–821, Sept. 2019.

M. Mesran, TM Diansyah, and F. Fadlina, "Implementation of the Rank Order Cendroid (ROC) and Operational Competitiveness Rating Analysis (OCRA) Methods in Implementing Computer Lecturer Performance Assessment (Case Study: STMIK Budi Darma)," Pros. Semin. Nas. Ris. inf. science., vol. 1, no. 0, p. 822, Sept. 2019.

Bila bermanfaat silahkan share artikel ini

Berikan Komentar Anda terhadap artikel Implementation of TOPSIS Method in the Selection of Candidates for the Student Skills Competition in Technical Competence Drawing Building

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Juanda Hakim Lubis, Garuda Ginting, Mesran Mesran, Zahri Hubby Ramadhani, Delvi Syahfitri

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


The IJICS (International Journal of Informatics and Computer Science)
Published by STMIK Budi Darma.
Jl. Sisingamangaraja No.338 Simpang Limun, Medan, North Sumatera
Email: ijics.stmikbudidarma@gmail.com

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.