Penerapan Monitoring Locator Dies pada Perusahaan Stamping Part Otomotif

 (*)Denny Riandhita Arief Permana Mail (Politeknik STMI Jakarta, Jakarta, Indonesia)
 Morgan Suseta (Politeknik STMI Jakarta, Jakarta, Indonesia)
 Ahlan Ismono (Politeknik STMI Jakarta, Jakarta, Indonesia)

(*) Corresponding Author

Submitted: September 29, 2022; Published: September 30, 2022

Abstract

PT. Ganding Toolsindo is an automotive stamping parts company that has been established since 1998. This design is illustrated by conducting research at the kruing plant which is placed in the production division to assist the audit process at first and collect customer data, then get a mandate from the managerial to create an information system that is integration and innovation in the area of return and use of dies. Then look for accurate data with various methods so that the implementation of this system goes well, on this occasion the design was made with the concept of a dies locator information system that tracks the existence of dies for production and contains the identity of dies data in the production process. The problem that occurs is that the operator often places the dies not according to the existing shelves and in the end the dies become unorganized and neat when the production process is running. The method of developing this system is to use SDLC (system development life cycle), namely Waterfall. This information system uses mysql and codeigniter, then to run this system using xampp. The whole of this information system is about tracking the dies whether they are in production or on the shelf, if they are being repaired, the status of the dies will change as well as the status of the dies when they are being used in production. In this system feature there are customer data, part data, shelf data, user data and the duration of use of the dies. In the end, this system generates a report to the production supervisor to be seen and in what dies data is being used in production so that there will be no more misplaced shelves.

Keywords


Locator Dies, Production, Use Dies-Back Dies, Information System

Full Text:

PDF


Article Metrics

Abstract view : 173 times
PDF - 48 times

References

H. Haryanto and E. Permata, “Sistem Monitoring Proses Produksi pada Mesin Bardi di PT. Tirta Investama (Danone Aqua) Sukabumi Berbasis Web,” Setrum Sist. Kendali-Tenaga-elektronika-telekomunikasi-komputer, vol. 3, no. 1, p. 26, 2016.

H. M. Ridlwan, S. Prasetya, P. Mumpuniadhi, Muslimin, and S. Mulyono, “Implementasi Perancangan Perangkat Lunak Untuk Kendali Dan Monitoring Mesin Vacuum Forming Otomatis,” J. Tek. Inform. Kaputama, vol. 4, no. 1, pp. 21–28, 2020.

S. P. Pratama and J. S. Wibowo, “Rancang Bangun Sistem Monitoring, Pelaporan Dan Input Data Mesin Curing PCR,” J. Instrumentasi dan Teknol. Inform., vol. 2, no. 2, pp. 69–76, 2021.

Falah Cepty Nur; Rispianda; Prassetyo Hendro, “Rancangan Combination Dies Untuk Produk Engine Mounting T120SS Di PT. Jati Wangi,” Reka Integr. J. Online Inst. Teknol. Nas., vol. 03, no. 03, pp. 380–391, 2015.

R. A. Herdianto, “ANALISIS DAN PENGEMBANGAN SISTEM INFORMASI PENERIMAAN SISWA BARU,” Ski. Yogyakarta Fak. Tek. Univ. Negeri Yogyakarta., no. 1, p. 2, 2014.

D. R. A. Permana and G. M. Rahmah, “Perancangan Sistem Informasi Geografis Pariwisata Dki Jakarta Berbasis Website,” J. Teknol. dan Manaj., vol. 19, no. 1, pp. 7–16, 2021.

Y. Anggraini, D. Pasha, and A. Damayanti Setiawan, “Sistem Informasi Penjualan Sepeda Berbasis Web Menggunakan Framework Codeigniter ( Studi Kasus : Orbit Station ),” J. Teknol. dan Sist. Inf., vol. 1, no. 2, pp. 64–70, 2020.

G. W. Sasmito, “Penerapan Metode Waterfall Pada Desain Sistem Informasi Geografis Industri Kabupaten Tegal,” J. Inform. Pengemb. IT, vol. 2, no. 1, pp. 6–12, 2017.

M Teguh Prihandoyo, “Unified Modeling Language (UML) Model Untuk Pengembangan Sistem Informasi Akademik Berbasis Web,” J. Inform. J. Pengemb. IT, vol. 3, no. 1, pp. 126–129, 2018.

R. A. 2 Denny Rianditha AP 1, “Perencanaa Sistem Informasi E-Logistic studi kasus : PT Kamadjaja Logistic.”

J. Shadiq and R. W. Ratu Lolly, “Sistem Informasi Kasir pada Restoran Siap Saji FoodPanda Berbasis Desktop,” Inf. Manag. Educ. Prof. J. Inf. Manag., vol. 5, no. 1, p. 85, 2020.

D. R. A. P, “Implementasi Augmented Reality Pada Aplikasi Pengenalan Komponen Pesawat Terbang 1,” JATISI (Jurnal Tek. Inform. dan Sist. …, vol. 8, no. 3, pp. 1651–1662, 2021.

D. R. A. Permana, “ANALISIS SISTEM E-LOGISTIC EKSPOR IMPOR,” News.Ge, p. https://news.ge/anakliis-porti-aris-qveynis-momava, 2018.

Bila bermanfaat silahkan share artikel ini

Berikan Komentar Anda terhadap artikel Penerapan Monitoring Locator Dies pada Perusahaan Stamping Part Otomotif

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Denny Riandhita AP, Morgan Suseta, Ahlan Ismono

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Jurnal Sistem Komputer dan Informatika (JSON)
Dikelola oleh STMIK Budi Darma
Sekretariat : Jln. Sisingamangaraja No. 338 Telp 061-7875998
email : jurnal.json@gmail.com


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.