Aplikasi Sistem Pencarian Sukarelawan Menggunakan Metode Simple Additive Weighting (SAW) Pada Kementerian Kesehatan RI Berbasis Mobile

Authors

  • Devie Alifa Paramitha Universitas Mercu Buana, Jakarta
  • Muhammad Farhan Ilhamdi Universitas Mercu Buana, Jakarta
  • Muhammad Farhan Universitas Mercu Buana, Jakarta
  • Fajar Masya Universitas Mercu Buana, Jakarta

DOI:

https://doi.org/10.30865/json.v3i2.3614

Keywords:

Volunteer, PIECES, Android, Simple Additive Weighting, Rapid Application Development, RAD

Abstract

With a rapid growth in technology nowadays, helping information dissemination. But, in affect of covid-19 pandemic resulting in the lack of place for skill development for the next generation. Volunteering is one of the popular social activites in Indonesia. As such, the information dissemination about the social activities just limited on “mouth to mouthâ€. Therefore, Re-L1 designed to spread information easily from event holders to volunteers. In this case, especially for Indonesian Ministry of Health. This application is based on android for the volunteer to register. Also, the business process is analyzed using PIECES methodology and is designed using Rapid Application Development (RAD) methodology. This application also supported with decision support system methodology, Simple Additive Weighting (SAW) in order to produce an optimal volunteer and fit the requirement that Ministry of Health needs. This research resulting an application that helping Ministy of Health on opening a volunteer reqruitment for the social activities.

References

J. J. Karinda and R. Arianti, “Potret Kebahagiaan Relawan Studi Kasus Relawan Satya Wacana Peduli di Lombok,†Humanit. (Jurnal Psikologi), vol. 4, no. 1, 2020, doi: 10.28932/humanitas.v4i1.2397.

A. A. Chamid, B. Surarso, and F. Farikhin, “Implementasi Metode AHP Dan Promethee Untuk Pemilihan Supplier,†J. Sist. Inf. Bisnis, vol. 5, no. 2, pp. 128–136, 2015, doi: 10.21456/vol5iss2pp128-136.

B. Raharjo, Pemrograman Android dengan Flutter. Bandung: Informatika Bandung, 2019.

H. O. L. Wijaya, “IMPLEMENTASI METODE PIECES PADA ANALISIS WEBSITE KANTOR PENANAMAN MODAL KOTA LUBUKLINGGAU,†JUSIM (Jurnal Sist. Inf. Musirawas), vol. 3, no. 1, 2018, doi: 10.32767/jusim.v3i1.289.

T. Herdi, A. Dores, and F. Masya, “Simple Additive Weighting in Selection of Cities Performance of Non Smoking Area and Tobacco Advertisements , Promotions and Sponsors Ban,†Int. J. Inf. Syst. Comput. Sci., vol. 1, no. 2, pp. 71–79, 2020, [Online]. Available: https://ojs.stmikpringsewu.ac.id/index.ph p/ijiscs/article/view/897.

V. Julianto, L. Lastriani, W. Aprianti, and H. Herpendi, “Penerapan Metode Simple Additive Weighting (SAW) untuk Penentuan Seleksi Staf Terbaik Politeknik Negeri Tanah Laut Berbasis Web Mobile,†J. Sains dan Inform., vol. 4, no. 2, 2018, doi: 10.34128/jsi.v4i2.145.

A. Setiadi, Y. Yunita, and A. R. Ningsih, “Penerapan Metode Simple Additive Weighting(SAW) Untuk Pemilihan Siswa Terbaik,†J. Sisfokom (Sistem Inf. dan Komputer), vol. 7, no. 2, 2018, doi: 10.32736/sisfokom.v7i2.572.

N. Q. Nada, M. W. I. Fahmi, and A. T. J. Harjanta, “APLIKASI MONITORING KINERJA PEGAWAI MENGGUNAKAN ALGORITMA SIMPLE ADDITIVE WEIGHTING (SAW) DI BADAN PUSAT STATISTIK KABUPATEN PATI BERBASIS MOBILE,†J. Inform. Upgris, vol. 6, no. 2, 2020, doi: 10.26877/jiu.v6i2.8240.

P. Diah, S. Dewi, and S. Suryati, “Penerapan Metode AHP dan SAW untuk Penentuan Kenaikan Jabatan Karyawan,†JATISI (Jurnal Tek. Inform. dan Sist. Informasi), vol. 5, no. 1, 2018, doi: 10.35957/jatisi.v5i1.130.

E. Ismanto and N. Effendi, “Sistem Pendukung Keputusan Penerimaan Karyawan Dengan Metode Simple Additive Weighting (SAW),†SATIN - Sains dan Teknol. Inf., vol. 3, no. 1, 2017, doi: 10.33372/stn.v3i1.208.

M. N. P. Pratama, A. Sevtiana, and D. Martha, “Penerapan Metode Simple Additive Weighting (Saw) Pada Sistem Seleksi Penerimaan Calon Siswa Baru (Studi Kasus: Smk Negeri 1 Cirebon),†J. Digit, vol. 5, no. 2, 2017.

A. Rikki, M. Marbun, and J. R. Siregar, “Sistem Pendukung Keputusan Penerimaan Karyawan Dengan Metode SAW Pada PT. Karya Sahata Medan,†J. Informatics Pelita Nusant., vol. 1, no. 1, 2016.

D. Nurma’ruf and T. Herdi, “Sistem Pendukung Keputusan Pengangkatan Karyawan Tetap Menggunakan Metode Saw (Simple Additive Weighting) Pada Industri Battery (Aki),†J. Sist. Inf. dan E-Bisnis, vol. 1, no. 5, 2019.

H. Hery, R. Christopher, A. E. Widjaja, and S. Suryasari, “Pengembangan Aplikasi Manajemen Rekrutmen Karyawan Menggunakan Metode Profile Matching,†INTENSIF J. Ilm. Penelit. dan Penerapan Teknol. Sist. Inf., vol. 3, no. 1, 2019, doi: 10.29407/intensif.v3i1.12588.

W. Subroto and T. Herdi, “Sistem Pendukung Keputusan Dalam Menentukan Prioritas Penjadwalan Produksi Menggunakan Metode Edd (Earliest Due Date) Dan Spt (Shortest Processing Time) Pada Industri Farmasi,†J. Sist. Inf. dan E-Bisnis, vol. 1, no. 2, 2019.

R. M. Fauzi and F. Nurpandi, “PERANCANGAN DAN

PEMBANGUNAN APLIKASI REKRUTMEN ASISTEN LABORATORIUM BERBASIS MOBILE,†Media J. Inform., vol. 11, no. 2, 2020, doi: 10.35194/mji.v11i2.1015.

A. Herdiyanti and U. D. Widianti, “PEMBANGUNAN SISTEM PENDUKUNG KEPUTUSAN REKRUTMEN PEGAWAI BARU DI PT. ABC,†Komputa J. Ilm. Komput. dan Inform., vol. 2, no. 2, 2015, doi: 10.34010/komputa.v2i2.91.

A. Mulyoningtyas, D. H. Satyareni, and M. Masrur, “Perancangan Sistem Pendukung Keputusan untuk Menentukan Siswa Berprestasi Menggunakan Metode Ahp (Analytical Hierarchy Process) Berbasis Java,†Nusant. Enginering, vol. 3, no. 1, pp. 21–28, 2016, [Online]. Available: https://ojs.unpkediri.ac.id/index.php/noe/ article/view/243.

A. Fauzi and E. Harli, “Peningkatan Kualitas Pelayanan Melalui CRM dengan Metode RAD,†J. RESTI (Rekayasa Sist. dan Teknol. Informasi), vol. 1, no. 1, 2017, doi: 10.29207/resti.v1i1.16.

Downloads

How to Cite

Paramitha, D. A., Ilhamdi, M. F., Farhan, M., & Masya, F. (2021). Aplikasi Sistem Pencarian Sukarelawan Menggunakan Metode Simple Additive Weighting (SAW) Pada Kementerian Kesehatan RI Berbasis Mobile. Jurnal Sistem Komputer Dan Informatika (JSON), 3(2), 216–222. https://doi.org/10.30865/json.v3i2.3614

Issue

Vol. 3 No. 2 (2021): Desember 2021

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).