Rancang Bangun Protoype Robot Navigasi Pemadam Api di Bandar Udara
DOI:
https://doi.org/10.30865/json.v1i3.2188Keywords:
Fire Extinguisher Robot, Arduino Uno R3, Fire Sensor, Ultrasonic SensorAbstract
In aviation engineering, Aviation Safety must be an extreme concern for the government as a regulator / facilitator, each component of the Airport sub-system in conducting its operations must still prioritize flight safety and safety. In this case the supporting components and the utilization of AI technology are felt to be very necessary in order to complete the needs will Fulfill Flight Safety by utilizing robots as a medium. In general, robots can be defined as a mechanical device that is able to do human work or behave like humans. One of the human jobs that can be done by robots is fire fighting activities. In this study, researchers designed a Fire Extinguisher Robot to find and extinguish fire. The design of this robot uses an ultrasonic sensor HC-SR04 as a parameter for the robot's path when there are objects around and a fire sensor module as a detector for the presence of fire this robot uses MG995 servo that is useful as a controller hose from the water pump. The circuit in this robot has important components, the Arduino microcontroller functions as the brain of the robot and the L298P Motor Shield Driver functions as a DC motor drive module. If the robot detects a fire while walking, the robot will stop and extinguish the fire using water and candles are used as a fire simulation when a fire is happening.Â
References
M. F. Faris, A. Triwiyatno, and I. Setiawan, “PERANCANGAN ARM MANIPULATOR 4 DOF DENGAN MENGGUNAKAN PENGENDALIAN CARTESIAN SPACE-TRAJECTORY PLANNING,†TRANSIENT, vol. 1, no. 4, pp. 152–157, 2012.
F. N. D. Furnama, “Mikrokontroler sandi morse dalam bentuk cahaya dan suara dengan bluetooth control android,†Media J. Inform., vol. 9, no. 1, pp. 16–27, 2017.
M. Zikri and R. Khair, “Rancang Bangun Monitoring Polusi Udara Berbasis Arduino,†J. Teknovasi J. Tek. dan Inov., vol. 5, no. 1, pp. 27–38, 2018.
A. Çakir, N. Farooq, and E. Ezzulddin, “Fire-Extinguishing Robot Design by Using Arduino,†IOSR J. Comput. Eng., vol. 18, no. 6, pp. 113–119, 2016.
Alfith, “PERANCANGAN ROBOT CERDAS PEMADAM API DENGAN SENSOR THERMAL ARRAY TPA 81 BERBASIS MICROCONTROLLER ARDUINO MEGA 2560,†J. Tek. Elektro ITP, vol. 5, no. 2, pp. 95–102, 2016.
M. S. Hasibuan, Syafriwel, and I. Idris, “Intelligent LPG Gas Leak Detection Tool with SMS Notification,†J. Phys. Conf. Ser., vol. 1424, no. 1, 2019.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
